PUDU BG1

The PUDU BG1 price is not published as one universal manufacturer MSRP for every country and package. A current Australian retailer lists the standard BG1 at approximately A$49,390 including GST, while a US integrator advertises BG1 Series pricing starting around US$36,999. Series-level starting prices may not identify the exact BG1 or BG1 Pro package, workstation or service scope. Public prices should be treated as market references rather than guaranteed worldwide pricing because tax treatment, currency, freight, commissioning, accessories and service vary. The delivered cost may also include charging equipment, batteries, cleaning modules, mapping, software, subscriptions, plumbing, installation, training, warranty, spare parts, consumables and local field support.

Before comparing offers, confirm the exact model, whether the figure includes VAT or GST, which accessories are supplied, who performs site setup and what support is available after deployment. The better buying question is: what is included, what is excluded and what will the robot cost to operate at the real site?

You can request current PUDU BG1 pricing and an itemised commercial review through Anton Robots.

You can buy or request the PUDU BG1 through Anton Robots, authorised PUDU partners and regional commercial-cleaning robot suppliers. PUDU launched the BG1 Series in March 2026 and currently lists BG1 as the standard model.

Before buying, renting, leasing or importing a unit, confirm the exact model, regional certification, included hardware, software access, charger or workstation, shipping, taxes, warranty, consumables, spare parts and technical support. A product page or distributor listing does not always mean that the same configuration is available for immediate supported delivery in every country. Professional buyers should compare the complete operational package and support route rather than only the lowest displayed price. The supplier should explain site mapping, commissioning, operator training, maintenance and performance acceptance.

To start, request PUDU BG1 buying, availability or deployment guidance through Anton Robots.

You can find the PUDU BG1 for sale through authorised PUDU distributors, cleaning-equipment integrators and marketplaces such as Anton Robots. Finding a listing is only the first step.

Buyers should verify whether the unit is new, used, refurbished, ex-demo, subscription-based, allocated to a pilot or unsupported outside its original region. Confirm the model code, battery condition, cleaning assemblies, charger or workstation, software account, serial number, warranty, training and local service. A third-party listing should not be treated as proof that manufacturer software, spare parts or support will transfer to a new owner. A useful comparison should cover delivery country, expected lead time, included consumables, commissioning, performance testing and who supports the robot after installation.

If you are looking for a PUDU BG1, contact Anton Robots and compare it with other commercial cleaning robots.

Yes. You can request a PUDU BG1 quote through Anton Robots. A useful proposal should identify the exact robot, ownership or service structure, included cleaning equipment, charger or workstation, software, shipping assumptions, taxes, warranty, delivery estimate, training and local support.

The buyer should provide the destination country, the large hard-floor area, dry debris and spill profile, required coverage and spot-cleaning modes, edge-cleaning demand, traffic, ride-on use, chemical policy and workstation utilities, operating hours, floor plans, route widths, doors, lifts, network conditions and required launch date. The proposal should define who maps and commissions the site, what cleaning result is expected, how exceptions are handled and which performance is guaranteed. It should also separate the purchase price from recurring consumables, software, maintenance and service costs.

Anton Robots can help compare the PUDU BG1 against other service robots and determine whether a pilot or site survey is required before purchase.

A typical PUDU BG1 package may include the following equipment, although the exact contents vary by country, supplier and commercial structure:

• PUDU BG1 large scrubber-dryer robot
• 48 V 90 Ah battery platform and charging equipment
• Front sweeping roller and 550 mm scrub system
• Extendable edge-cleaning brush
• Squeegee, rubber blades and disc-brush consumables
• 75 L clean-water and 60 L wastewater tanks
• 5 L debris container and dual chemical tanks totalling about 7 L
• PUDU Link, mapping and operator tools specified by the supplier

Dust mopping, polishing, elevator or e-gate integration and the all-in-one refill, drainage and charging workstation are optional unless explicitly included. Ask for a written packing list and service scope before placing an order. Hardware, software and deployment services are often separated in commercial robotics purchases, and a low headline price may exclude the charger, workstation, spare battery, mapping, installation, training, consumables or warranty handling needed for practical operation. Confirm which brushes, pads, squeegees, filters, bags, chemicals and replacement parts are supplied for the first operating period.

You can request an itemised PUDU BG1 offer through Anton Robots.

The standard PUDU BG1 and BG1 Pro share the same core cleaning platform: 90 Ah battery, 7.5-hour maximum sweeping and scrubbing runtime, 75 L and 60 L water tanks, 550 mm scrub width, 708 mm width with side brushes, AI Magic Cleaning and optional workstation. The published differences are navigation and cruise speed. BG1 uses LiDAR plus 3D VSLAM fusion positioning and travels at up to 1.0 m/s. BG1 Pro uses 3D LiDAR plus 3D VSLAM fusion positioning and reaches up to 1.2 m/s.

Buyers should choose Pro when enhanced 3D perception and higher transfer speed are valuable in high-clearance, low-light or complex sites. Confirm whether any regional package adds other differences.

The BG1 uses an integrated front sweeper and rear scrubber-dryer. The front module collects dry debris, while the disc brush applies pressure and water for deep cleaning and the rear squeegee recovers dirty water. This removes the traditional need to sweep an area before a separate scrubbing pass.

PUDU’s adaptive mechanism can retract the sweeping section when it detects wet spills to avoid spreading contamination. Performance still depends on debris size, chemical selection, brush pressure, speed and floor condition. Large packaging, metal fragments, string, hazardous liquids and heavy oil should be removed or managed through a specific safety procedure. A pilot should inspect debris pickup, scrub quality, water recovery and drying in one-pass operation.

PUDU lists up to 2,000 m² per hour in covered-cleaning mode and up to 6,000 m² per hour in spot-cleaning mode. The 550 mm scrub width expands to 708 mm with side brushes. Spot-cleaning throughput is not equivalent to full-area deep scrubbing because the robot targets detected messes rather than covering every square metre. Net shift output depends on traffic, obstacles, water and chemical service, charging, route overlap, brush pressure and required floor quality.

Buyers should calculate coverage using the full cleaning mode required by the site and treat spot mode as an additional proactive capability. Measure accepted cleaned area, spill response, edge follow-up and intervention rate during a real-site pilot.

The BG1 is specified for up to 7.5 hours of sweeping and scrubbing. It uses a 48 V 90 Ah battery, with charging of approximately three hours on higher-voltage AC supply or 4.5 hours on lower-voltage supply.

The robot carries 75 L of clean water, 60 L of wastewater, a 5 L debris bin and dual chemical tanks totalling about 7 L. Runtime and coverage vary with brush pressure, speed, water flow, chemical dosing, floor resistance and obstacle frequency. The large tanks reduce service stops but require a safe refill, drain and chemical-handling process. Confirm local voltage, charger type, battery warranty and whether the workstation is included.

AI Magic Cleaning is PUDU’s control layer for proactive spot response, adaptive brush behaviour and automatic chemical dosing. Ultra-wide-field vision can identify messes and direct the robot to clean them rather than waiting only for a fixed full-route schedule.

When wet spills are detected, the system can retract sweeping modules to reduce secondary spreading. For stubborn stains, it can increase brush pressure.

The dual-agent system adjusts detergent ratios with millilitre-level precision based on floor conditions. These features should be validated against the site’s actual stains, lighting, floor colour and chemical policy. AI detection does not replace hazardous-spill procedures or human inspection. Buyers should confirm supported mess categories, data handling and how the system reports decisions and exceptions.

The standard BG1 uses LiDAR plus 3D VSLAM fusion positioning with AI vision and high-performance computing for mapping, localisation and dynamic obstacle avoidance. PUDU positions the system for large, high-clearance, low-light and interference-prone environments. The robot requires a minimum path clearance of about 850 mm.

Real performance depends on traffic, forklifts, reflective surfaces, shelving overhangs, pallets, temporary barriers and sensor cleanliness. Routes should define pedestrian interaction, no-go areas, emergency access and safe operation around loading activity.

The robot’s audio and visual alerts communicate intent, but site rules and staff training remain necessary. Commissioning should test navigation during realistic traffic, not only an empty warehouse.

The optional all-in-one BG1 workstation can automate charging, clean-water refill, wastewater drainage and service-cycle tasks, supporting longer unattended operation. It requires power, water, drainage, network coverage and enough clear approach space. Ride-on mode allows an operator to manually drive the platform for rapid relocation, initial mapping or intervention across large sites. The robot also supports PUDU Link management and optional communication with e-gates or elevators.

Buyers should confirm which station functions are included, plumbing requirements, docking recovery and whether ride-on use is permitted under local site rules. Even with the workstation, staff still need to empty debris, inspect consumables, clean sensors and respond to exceptions.

The PUDU BG1 may be available for international delivery through PUDU and its regional partner network, but availability, certification, service coverage and lead time vary by country. Before importing a robot, confirm electrical standards, battery-shipping requirements, customs classification, taxes, local safety obligations, wireless approvals, language support, software region, warranty validity and access to spare parts.

Commercial cleaning robots normally require more than freight delivery: the site may need mapping, commissioning, operator training, network setup, consumable supply and a defined repair route. Ask who will provide onsite support and how long replacement parts normally take to arrive. A robot bought outside the intended region may have limited warranty or cloud access.

Request a PUDU BG1 international availability review through Anton Robots before committing to an import.

The PUDU BG1 is a current commercial product, but stock and delivery time depend on country, configuration, battery allocation, accessories, workstation requirements and local commissioning capacity. BG1 is a newly launched 2026 platform, so early regional inventory, demonstration units and workstation availability may be limited or project-allocated.

Do not assume that a visible product page means the exact unit is sitting in a local warehouse. Ask the supplier to confirm whether the robot is in stock, incoming, built to order or allocated after a site survey. The written proposal should separate manufacturing or warehouse lead time, international freight, customs, local delivery, mapping, installation and acceptance testing.

If the robot is needed for a fixed launch, event or contract date, obtain a written delivery plan and contingency. Request current PUDU BG1 stock and lead-time information through Anton Robots.

Before purchasing or deploying the PUDU BG1, check the hardware warranty, battery coverage, cleaning-component exclusions, software support period, response times, preventive maintenance, spare-parts availability and repair process. Confirm coverage for the 48 V battery, drive system, LiDAR and 3D vision, AI computing platform, pumps, dosing system, brushes, tanks, squeegee and optional workstation. Brushes, pads, squeegees, filters, dust bags, tyres and other wear items are normally treated differently from the main robot.

Ask whether support is remote, onsite or delivered through a regional partner, and who pays freight or technician travel. The agreement should state what happens if the robot arrives damaged, cannot complete the agreed routes or is unavailable during a critical cleaning period.

For professional buyers, the quality of local support can affect lifetime value more than a small difference in purchase price. Contact Anton Robots to review the proposed warranty and service package before committing.

The PUDU BG1 is worth considering when a large commercial or industrial site needs proactive one-pass sweeping and scrubbing, edge cleaning, long runtime and optional unattended servicing. Its value depends on matching the robot to a repeatable workflow, realistic floor conditions and an operating team rather than buying it only because autonomous cleaning is attractive. The strongest business case normally includes measurable labour, coverage, consistency, safety or scheduling benefits and a clear plan for daily maintenance and exception handling. It may be a weak investment when the cleanable area is small, routes are narrower than 850 mm, the site is mostly carpet or there is no process for large-tank and chemical management.

Buyers should compare the complete cost of ownership, including accessories, software, installation, consumables, maintenance, batteries and internal staff time. A representative pilot should measure acceptable cleaned area per shift, intervention rate, water and chemical use, drying quality and uptime. Compare it with the PUDU BG1 Pro, PUDU MT1 or CC1, KEENON C55, LionsBot R12 Rex Scrub or conventional ride-on scrubbers before deciding.

You can review other commercial cleaning robots through Anton Robots.