FANUC CRX-10iA/L

The FANUC CRX-10iA/L price is generally supplied by quotation, although some public distributor packages have been listed around US$56,900 before application tooling, integration, freight and taxes. The final cost can change according to the country, configuration, freight, taxes, accessories, software, commissioning, training, warranty and support.

Buyers should be careful when comparing online prices because one figure may describe only the base robot while another may include application hardware, integration or service. For a professional deployment, the more useful question is what is included, what is excluded, and what is required before the robot can perform the intended task? Ask for an itemised offer covering the robot, controller or operating interface, batteries or power equipment, required tools, software licences, installation, training, delivery, warranty and ongoing support. This is especially important when the product is sold by quotation, rental, subscription or pilot rather than through a standard retail checkout.

You can request a FANUC CRX-10iA/L quote through Anton Robots to compare the complete package and commercial terms before proceeding.

You can buy or request the FANUC CRX-10iA/L through Anton Robots. Anton Robots helps buyers review the current commercial route, compare available supplier or manufacturer information, understand what is included and decide whether the FANUC CRX-10iA/L is suitable for the intended application. The cobot is also sold through FANUC and authorised automation distributors and integrators, with regional pricing and application packages.

Before buying, reserving, renting or entering a pilot, confirm the exact model, configuration, availability, delivery territory, hardware package, software access, installation, training, warranty, maintenance and after-sales support. Do not assume that every offer bearing the same product name includes the same equipment or operating services. Enterprise robots often require application design, site preparation and integration before they create value. This means the lowest displayed price is not automatically the lowest total cost or the safest offer.

To start, request FANUC CRX-10iA/L buying guidance through Anton Robots and compare the proposed package with other cobots.

You can find the FANUC CRX-10iA/L for sale through FANUC, authorised integrators, industrial automation suppliers and specialist robot marketplaces such as Anton Robots. Finding a listing is only the first step. The buyer should verify whether it represents a new robot, a used unit, a rental, a pilot programme, a reservation or a complete deployed solution.

Check the exact hardware version, included accessories, software licences, delivery location, expected lead time, installation obligations, warranty and who will provide technical support after handover. This is particularly important for specialist robots because the base machine may not perform the desired workflow without tooling, maps, facility integration, operator training or application software. A low advertised price can become more expensive once freight, commissioning, accessories, service and local compliance are added.

If you are comparing a FANUC CRX-10iA/L for sale, ask for a written scope and acceptance criteria rather than relying on a product-page headline. Contact Anton Robots for help reviewing the commercial status and complete package before placing an order.

Yes. You can get a quote for the FANUC CRX-10iA/L through Anton Robots. A useful quotation should include more than the base robot price. It should identify the delivered configuration, controller or operator interface, batteries or power equipment, tools and accessories, software, connectivity, freight, installation, training, warranty, support, lead time and any recurring service charges. For the CRX-10iA/L, the quote should separate the robot and controller from grippers, welding or dispensing equipment, vision, mounting, safety hardware, machine interfaces, integration, training and acceptance testing.

The application should also be described clearly enough for the supplier to check payload, reach, route, floor, crop, object, cycle-time, safety or environmental requirements as applicable. Without that information, two quotes may look comparable while describing very different solutions. Ask which work is included, which work belongs to the buyer or integrator, how acceptance will be measured and what happens if the robot cannot meet the agreed workflow.

Anton Robots can help compare the FANUC CRX-10iA/L against other cobots and request an itemised proposal based on the use case and destination.

A typical FANUC CRX-10iA/L package may include the core robot and the standard operating equipment described by the manufacturer, but the final packing list depends on the version, country and commercial agreement. The cobot arm normally needs an end effector, mounting solution, application software and cell integration before it can perform a production task, and these items can exceed the base hardware cost. Before committing, request a written list covering:

• FANUC CRX-10iA/L collaborative robot arm
• FANUC controller and required cable set
• Tablet teach pendant or operator interface specified
• Standard programming software and documentation
• Selected end effector, dress pack or application kit if specified
• Mounting, safety and integration equipment if specified
• Warranty, training and technical support

Also confirm whether freight, taxes, import clearance, installation, site mapping, integration, operator training, software subscriptions, spare parts and after-sales support are included or quoted separately. This matters because two offers can use the same product name but deliver different operational readiness. The robot hardware alone may not be enough for a real application. For business buyers, the complete installed and supported package is more important than the headline price.

You can request an itemised FANUC CRX-10iA/L offer through Anton Robots before buying, renting or entering a pilot.

The FANUC CRX-10iA/L has a 10 kg payload, 1,418 mm reach and approximately ±0.04 mm repeatability. Payload must include the gripper, tool, sensors, brackets, cables and the part being handled. A 10 kg workpiece cannot usually be carried with a heavy end effector while staying within the rated limit.

The long reach is useful for accessing machines, conveyors, multiple fixtures and light palletizing positions, but layout must also consider joint limits, singularities and collision clearance. Repeatability describes how consistently the robot returns to a taught position; final process accuracy also depends on calibration, tool centre point, fixtures, vision and part variation. The extended arm can create larger moments at the base, so the mounting structure must be designed accordingly.

Buyers should provide part and tool weights, centre of gravity, all required positions and cycle-time targets before selecting the robot. Request CRX-10iA/L sizing advice through Anton Robots.

FANUC has broad global sales and service coverage, but the robot should be purchased through the appropriate regional FANUC organisation or authorised integrator for local warranty and support. International delivery is not determined by the robot alone. It can depend on the destination country, manufacturer coverage, authorised partners, freight restrictions, batteries, customs, taxes, wireless approvals, local safety requirements and the availability of commissioning or repair support.

Ask who will act as importer, who pays duties and taxes, where warranty work is performed and how replacement parts or specialist service will reach the site. For software-connected robots, also confirm cloud availability, data location, cybersecurity requirements and whether remote support works in the destination region. A product shown online should not be assumed to have immediate worldwide supply. Buyers with a fixed project date should obtain written confirmation of the configuration, lead time and local service plan before placing an order.

You can request international FANUC CRX-10iA/L availability through Anton Robots so the complete regional position can be checked.

FANUC CRX-10iA/L availability and delivery time can change according to production, country, configuration, commercial model and current demand. The CRX-10iA/L is an established commercial cobot, but delivery depends on controller, regional stock, options, application equipment and integrator schedule. A robot may be shown on a manufacturer website while still requiring a quotation, application review, rental agreement, production slot, pilot approval or regional distributor confirmation. Lead time can also be affected by accessories, batteries, custom tooling, software, freight, customs, site preparation, commissioning and operator training.

If the robot is needed for a harvest window, construction programme, production launch, trade show or customer commitment, do not rely on a generic online estimate. Ask the supplier to confirm whether the exact unit is in stock, built to order, allocated to a programme or dependent on an integration schedule. The written proposal should separate shipping time from the time required to make the robot operational.

Request current FANUC CRX-10iA/L availability through Anton Robots before making project commitments.

Before purchasing, renting or deploying the FANUC CRX-10iA/L, check the warranty or service period, covered components, exclusions, response times, preventive maintenance, software support, spare-parts availability and the process for repairs. Confirm the local FANUC warranty, controller service, preventive-maintenance requirements, spare parts, training, software options, onsite response and support for the complete integrated cell.

Specialist robots may also require help with setup, mapping, calibration, application tooling, software updates, network configuration, operator training and recovery after faults. Ask whether support is delivered remotely, onsite or through a regional partner, and who pays freight or travel for service. The agreement should state what happens if the robot arrives damaged, misses performance targets or becomes unavailable during a critical operating period. Battery, consumable and wear-part coverage should be checked separately because they are often treated differently from the main hardware.

For professional buyers, support quality can have a larger effect on lifetime value than a small difference in purchase price. Contact Anton Robots to review the proposed warranty, rental or service package before committing.

The FANUC CRX-10iA/L is worth considering when a manufacturer needs a reliable long-reach cobot for a defined industrial task and values FANUC service, IP67 protection, easy teaching and low scheduled maintenance. Its value depends on matching the robot to a defined workflow, environment and operating team rather than buying it only because the technology is impressive. The strongest business case normally includes measurable labour, throughput, quality, safety, capacity or scheduling benefits and a realistic plan for integration and support.

However, the robot may be unnecessarily large or expensive for simple desktop tasks and cannot create value without suitable tooling, fixtures, safety design and integration. Buyers should compare the robot with simpler alternatives such as conventional machinery, fixed automation, cobots, AMRs, manual tools or process redesign. A pilot should use real tasks and acceptance criteria, including exception handling and uptime, not only a controlled demonstration. Calculate the complete cost of ownership, including accessories, software, integration, training, maintenance and internal staff time.

You can compare other cobots through Anton Robots before deciding whether the FANUC CRX-10iA/L is the right investment.

Yes. Machine tending is a strong application for the FANUC CRX-10iA/L because its 1,418 mm reach can access machine doors, fixtures and part staging while the 10 kg payload covers many grippers and components. The complete project should check part weight, tool weight, machine opening, door automation, reach around guards, cycle time, coolant, chips and communication with the machine controller.

The robot may need a dual gripper to reduce idle time, part detection, blow-off, deburring or inspection equipment. A long reach does not guarantee that every position is accessible with the correct wrist orientation, so a simulation or physical layout review is important.

Collaborative operation may still require scanners, guarding or reduced speed because the machine, part and tool create hazards. Define how the cell handles a misloaded part, closed door, machine alarm or failed grip. Anton Robots can help request a complete CRX machine-tending package rather than only the arm.

The CRX-10iA/L is well suited to pick and place, packaging and material-transfer tasks within its payload and workspace. Its long reach allows one robot to serve several trays, conveyors or process stations.

The correct end effector depends on part shape, surface, weight, fragility and required cycle time. Vacuum may be efficient for cartons or flat products, while mechanical or adaptive grippers may suit components with variable geometry. Random picking requires vision, lighting and software in addition to the robot.

Buyers should calculate payload with the complete tool and consider acceleration, centre of gravity and cable routing. The application also needs a strategy for missing parts, double picks, dropped products and downstream blockage. If high speed is required, FANUC offers modes and sensing options that can increase movement under controlled conditions, but the safety design must support them. Compare the CRX with a SCARA or industrial robot if maximum throughput is more important than flexible collaborative deployment.

Yes. The CRX-10iA/L can support light palletizing and depalletizing when the carton, gripper and required stack positions fit its 10 kg payload and 1,418 mm reach. It may be suitable for small boxes, trays, bags or containers at moderate stack heights.

A palletizing project must check the full payload, box dimensions, pallet pattern, maximum height, base position, conveyor height and cycle-time requirement. The long-reach model offers more coverage than the standard CRX-10iA, but tall pallets may still require a lift column or a purpose-built palletizing configuration.

The gripper and any vacuum generator reduce the available product payload. Safety around stacked loads, pallets, forklifts and operators also needs assessment. For heavy cartons, high stacks or fast end-of-line production, a larger cobot or dedicated industrial palletizer may provide a better margin. Ask the integrator to simulate every layer and confirm whether the robot can reach without exceeding joint or payload limits.

The CRX-10iA/L can be configured for welding, adhesive dispensing, sealing and other path-following processes with the appropriate FANUC software, process equipment, dress pack and safety controls. The 10 kg payload and long reach can accommodate many torches, guns and dispensing tools.

Welding is not automatically collaborative simply because the robot arm is a cobot. Arc radiation, fumes, heat, sparks and sharp workpieces normally require guarding, extraction and process-specific safeguards. Dispensing quality depends on material delivery, tool calibration, path speed, nozzle distance, temperature and fixture repeatability.

Buyers should confirm whether a standard application package exists for the chosen process and who supplies the power source, feeder, pump, controller and consumables. A sample part should be tested for bead or weld quality and cycle time before production approval. The quote should include programming, process development, extraction, safety and training, not only the robot hardware.

The CRX range is designed for easier setup through a tablet teach pendant, icon-based programming and hand-guided teaching. Operators can move the arm by hand to desired positions and build task sequences using FANUC’s interface. More advanced projects can use FANUC options, vision, PLC communication, offline programming and integrator-developed logic.

Ease of teaching is useful for changeovers and small-batch automation, but production programming still needs structured error handling, tool setup, user permissions and backups. The buyer should confirm which software options and application functions are licensed in the proposed controller.

A simple demo programme may not include machine communication, vision, force sensing or process control. Ask who will own the final programme and whether operators receive enough training to recover from alarms and modify approved points. For multi-machine or high-mix work, document the recipe and changeover process before deployment.

The CRX-10iA/L is designed as a collaborative robot with contact stopping and safety functions, but the completed application must still be risk assessed. Whether people can work directly beside it depends on robot speed, payload, tool shape, part hazards, pinch points and the surrounding machinery. A blunt gripper carrying a lightweight component presents a different risk from a welding torch, sharp part or heavy fixture.

Collaborative operation may require reduced speed, safe zones, area sensors, guarding or separation depending on the task. FANUC supports higher-speed operation with appropriate external sensing, but the system integrator must validate the selected safety functions and stopping distances.

The installation should include accessible emergency stops, safe restart procedures, operator training and control of programme changes. Ask for documentation covering the robot, controller, tool and complete cell. The word collaborative describes available capabilities; it does not certify every application as safe without engineering controls.