ABB IRB 14050 Single-arm YuMi

The ABB IRB 14050 Single-arm YuMi price is normally available by project quote rather than as one fixed global list price. The final cost can depend on controller selection, software options, mounting, grippers, vision, safety engineering, integration, training, shipping, taxes and local support. ABB currently presents the robot as available to order with its modern controller ecosystem, but does not publish one universal installed-system price.

This is why two proposals for the same robot can have very different totals: one may cover only the base hardware, while another includes the controller, tooling, software, commissioning, training, travel, safety work and ongoing support. For a serious buyer, the better comparison is the total delivered and deployed cost for the exact application.

You can request a ABB IRB 14050 Single-arm YuMi quote through Anton Robots to compare the robot package, delivery assumptions, integration scope, warranty and support before purchasing. The final decision should be supported by a written specification and, where practical, a demonstration with representative parts, users or site conditions. Marketing videos are useful for discovery, but they do not replace an acceptance test tied to the buyer’s real requirement.

You can buy, order or request the ABB IRB 14050 Single-arm YuMi through Anton Robots. We help buyers check the correct commercial route, compare the available package, understand what is included and decide whether the robot fits the intended application. ABB currently offers the IRB 14050 for order through its robotics sales network, normally as a configured automation package. Before ordering, confirm the OmniCore controller, cables, mounting orientation, end effector, vision, safety functions, RobotStudio or Wizard requirements, training, installation and local service.

This matters because the same model name can refer to different controllers, software licences, service plans, regional configurations, accessories or integration scopes. For businesses, universities, construction teams, laboratories or specialist buyers, choosing the correct supported package is more important than finding the lowest isolated price.

To start, request an ABB IRB 14050 Single-arm YuMi quote or buying review through Anton Robots and compare price, configuration, availability, delivery and after-sales support.

You can find the ABB IRB 14050 Single-arm YuMi for sale through the manufacturer, authorised commercial channels and specialist robot marketplaces such as Anton Robots, subject to region and configuration. Finding a listing is only the first step. The important part is verifying the exact model, package and support scope. A lower advertised amount may exclude the controller, gripper, vision, fixtures, software options, integration, training, freight and local service.

Professional buyers should compare the total delivered and usable system, including the OmniCore controller, cables, mounting orientation, end effector, vision, safety functions, RobotStudio or Wizard requirements, training, installation and local service. This is especially important when the robot must meet a launch date, site requirement, research protocol or production target.

If you are looking for an ABB IRB 14050 Single-arm YuMi for sale, contact Anton Robots before ordering so the commercial status, configuration and support can be checked. The buyer should also define who owns software changes, backups, data, maintenance records and operator training after handover. These operational details often determine whether the ABB IRB 14050 Single-arm YuMi remains useful after the initial demonstration or installation.

Yes. You can request a quote or buying review for the ABB IRB 14050 Single-arm YuMi through Anton Robots. A useful quote should show more than the robot name. It should identify the IRB 14050 arm, OmniCore controller, programming interface, cables, mounting, end effector, vision, safety scope, integration, training, delivery and warranty.

This matters because a proposal that looks cheaper can become more expensive once omitted hardware, subscriptions, integration, freight, duties, installation or support are added. The quote should also state what the buyer must provide, the expected delivery process and any regional restrictions.

Anton Robots can help compare the ABB IRB 14050 Single-arm YuMi with other cobots and structure the enquiry around the actual use case rather than a generic price request. The buyer should also define who owns software changes, backups, data, maintenance records and operator training after handover. These operational details often determine whether the ABB IRB 14050 Single-arm YuMi remains useful after the initial demonstration or installation.

A typical ABB IRB 14050 Single-arm YuMi package may include the core robot and the items specified by the selected commercial configuration. The exact delivery can vary by country, application, service plan and supplier, so buyers should request a written packing and scope list. Confirm whether the offer includes:

• IRB 14050 Single-arm YuMi robot
• Compatible OmniCore controller and required cables
• Programming software and licences specified in the quote
• Selected gripper, tool or camera system
• Mounting base, stand or brackets where required
• Safety documentation, commissioning and training scope
• Freight, warranty and after-sales support

The package should also identify anything supplied by the customer, such as networking, site power, mounting, tooling, safety equipment, floor preparation or ongoing subscription fees. This matters because two offers can use the same product name while covering very different levels of readiness. You can request an itemised ABB IRB 14050 Single-arm YuMi package through Anton Robots before buying.

The ABB IRB 14050 Single-arm YuMi may be available for international delivery, but this depends on the manufacturer’s sales territory, destination, export rules, freight method, batteries, local certification, installation needs and support coverage. The arm is compact and lightweight, but the controller, packaging, customs classification and local ABB support still need to be confirmed.

Before ordering, ask whether the price includes freight, insurance, customs clearance, import duties, VAT or GST, local delivery, commissioning and return shipping for warranty work. For larger industrial robots, site access, lifting equipment, transport frames and engineer travel may also matter. You can request an international ABB IRB 14050 Single-arm YuMi review through Anton Robots so regional availability and the full landed package can be checked.

Before approving an order, document the exact ABB IRB 14050 Single-arm YuMi revision, intended task, destination, operator, integrations, acceptance test and support owner. This gives Anton Robots enough information to match the enquiry with a supplier that can deliver a complete working package rather than isolated hardware.

ABB IRB 14050 Single-arm YuMi availability and delivery time can change according to region, production schedule, configuration, stock, project approval and the amount of customisation or integration required. Standard hardware may be orderable, while controller, tooling and integration schedules can extend the project lead time.

Do not assume immediate delivery because a product page or enquiry button is visible. A supplier should confirm the exact model, commercial status, estimated production or dispatch window, dependencies, payment milestones and what happens if the schedule changes.

If the robot is needed for a construction phase, course, exhibition, research project or production launch, verify availability before committing to the wider project. You can request current ABB IRB 14050 Single-arm YuMi availability through Anton Robots. For procurement, compare the ABB IRB 14050 Single-arm YuMi against at least one alternative using the same payload, workspace, duty cycle, software, safety, service and landed-cost assumptions. A technically suitable robot can still be the wrong purchase when integration or regional support is weak.

Before buying the ABB IRB 14050 Single-arm YuMi, confirm the written warranty period, covered components, exclusions, preventive maintenance, repair location, response process, spare parts, software support and who pays freight or engineer travel. Confirm support for the exact controller generation and software environment because older IRC5-based offers and current OmniCore packages are not identical.

Also ask whether batteries, wear parts, end effectors, subscriptions, third-party software and customer modifications are covered. Industrial and social robots can require remote diagnostics, operator training and specialist service, so support should be evaluated as part of the purchase rather than after a fault occurs.

Anton Robots can help buyers compare the package and identify unanswered warranty questions before ordering. For procurement, compare the ABB IRB 14050 Single-arm YuMi against at least one alternative using the same payload, workspace, duty cycle, software, safety, service and landed-cost assumptions. A technically suitable robot can still be the wrong purchase when integration or regional support is weak.

The ABB IRB 14050 Single-arm YuMi is worth considering if you need agile, precise automation of very light parts in a compact shared or semi-shared workspace. Its seven axes, low mass and flexible mounting make it unusually capable around fixtures and benches.

However, it is not the right choice if the combined part and tool load approaches 500 g or the application requires longer reach, heavy production work or high-force processing. The decision should be based on the intended outcome, current commercial status, full ownership cost, operator skills, environment, integration and support. Buyers should not choose it only because the robot is famous, visually impressive or appears in demonstration videos.

Compare the ABB IRB 14050 Single-arm YuMi with other cobots through Anton Robots before deciding. Anton Robots should use this answer to capture transactional search intent while keeping the route accurate: compare the supported configuration, request a detailed quote and confirm the seller responsible for delivery, commissioning, warranty and ongoing technical support.

The ABB IRB 14050 payload is 500 g, and its stated reach is 559 mm. The low payload is deliberate: Single-arm YuMi is designed for light, precise work such as electronics assembly, component transfer, inspection, testing and laboratory handling. Payload calculations must include the gripper, fingers, camera, brackets, cables and the part itself.

A 350 g tool leaves much less capacity for the workpiece than the headline 500 g suggests. The 559 mm reach suits benches and compact cells, but the full motion study should include fixtures, approach angles, joint limits and the seven-axis posture.

If the combined tool and part weight is close to the limit, or the required reach extends beyond the compact work area, compare a larger cobot. Anton Robots can help review the complete end-of-arm load rather than sizing the robot from part weight alone. The buyer should also define who owns software changes, backups, data, maintenance records and operator training after handover. These operational details often determine whether the ABB IRB 14050 Single-arm YuMi remains useful after the initial demonstration or installation.

Yes. The IRB 14050 Single-arm YuMi is particularly well suited to electronics and small-parts assembly where parts are light, workspaces are compact and repeatable positioning is important. Typical projects can include component placement, connector insertion, test-station loading, inspection, sorting and light packaging. The seven-axis design helps the robot approach parts from useful angles and work around fixtures.

However, the robot arm alone does not create a complete assembly solution. The project may still need feeders, trays, a suitable gripper, cameras, force or presence sensing, quality checks, fixtures and communication with the production system. Cycle time, part presentation and error recovery should be tested with real components. For higher forces, larger products or heavy tooling, another ABB cobot or industrial arm may fit better.

For international projects, include currency, taxes, customs, freight, local certification, installation travel and return logistics in the comparison. A low base price can become a poor offer when the complete supported deployment is calculated.

The ABB IRB 14050 was designed for collaborative applications, but collaborative robot does not mean every application is automatically safe without guarding. Safety depends on the complete cell: speed, path, payload, tool shape, part edges, pinch points, fixtures, access and the type of interaction with people.

A small sharp component or powered tool can create risk even when the robot itself has collaborative features. The integrator should complete an application-specific risk assessment, validate stop and speed functions, define safe operating modes and document the final installation. Fenceless or close-proximity operation may be possible for an appropriate low-risk task, but barriers, scanners or restricted access may still be required. Ask the supplier to include applicable safety documentation and validation in the quotation.

Before approving an order, document the exact ABB IRB 14050 Single-arm YuMi revision, intended task, destination, operator, integrations, acceptance test and support owner. This gives Anton Robots enough information to match the enquiry with a supplier that can deliver a complete working package rather than isolated hardware.

ABB states that the current Single-arm YuMi offering is powered by the OmniCore controller. ABB also promotes Wizard Easy Programming for graphical workflow creation and RobotStudio for simulation, offline programming and engineering. The exact controller, software options, interfaces and licences should be written into the quote. This is important because older installations and second-hand units may use different controller generations or software packages.

Buyers should confirm I/O, fieldbus, network security, backup procedures, remote support, external-axis needs and whether the selected gripper or vision system has a supported integration path. Training requirements also depend on whether operators will use graphical programming, RAPID, RobotStudio or a combination.

Do not assume every IRB 14050 listing includes the same controller or licences. Before approving an order, document the exact ABB IRB 14050 Single-arm YuMi revision, intended task, destination, operator, integrations, acceptance test and support owner. This gives Anton Robots enough information to match the enquiry with a supplier that can deliver a complete working package rather than isolated hardware.

Yes. ABB describes the Single-arm YuMi as suitable for mounting in multiple orientations, including floor, table, wall and ceiling-style installations. Its approximately 9.5 kg arm mass makes flexible mounting one of the product’s main strengths. The mounting structure still needs to be rigid, correctly designed and approved for the robot’s dynamic loads.

Cable routing, service access, joint clearance, tool orientation and the controller location must also be planned. A ceiling installation may improve access to a bench or conveyor, while a wall mount can save floor space, but both can change the usable workspace and maintenance process.

Ask the integrator to simulate the intended orientation and include the required base plate, fasteners and structural verification. For procurement, compare the ABB IRB 14050 Single-arm YuMi against at least one alternative using the same payload, workspace, duty cycle, software, safety, service and landed-cost assumptions. A technically suitable robot can still be the wrong purchase when integration or regional support is weak.

Yes. The compact footprint, seven axes, low payload and ABB software ecosystem make the IRB 14050 suitable for laboratories, universities, testing facilities and applied robotics research. It can support automated sample handling, instrument loading, repetitive test procedures, human-robot interaction studies and teaching around industrial robot programming.

Researchers should confirm the interfaces required for external sensors, custom software, ROS-related work or real-time control, because an industrial controller is not the same as an open research platform. The budget should also include fixtures, end effectors, safety, training and support. For highly experimental low-level control, compare the controller access and development environment with research-focused arms before buying.

The final decision should be supported by a written specification and, where practical, a demonstration with representative parts, users or site conditions. Marketing videos are useful for discovery, but they do not replace an acceptance test tied to the buyer’s real requirement. The buyer should also define who owns software changes, backups, data, maintenance records and operator training after handover. These operational details often determine whether the ABB IRB 14050 Single-arm YuMi remains useful after the initial demonstration or installation.

Choose Single-arm YuMi when one agile low-payload arm can complete the process, floor space is limited or the robot needs flexible wall, ceiling or bench mounting. Choose Dual-arm YuMi when the task genuinely benefits from two coordinated arms, such as holding and assembling a component, transferring parts between hands or reproducing a two-handed workstation.

Both platforms have a 500 g payload per arm and a 559 mm reach, so Dual-arm YuMi does not solve heavy-load requirements. It adds coordination possibilities but also more cost, programming, tooling and cell complexity.

The best choice depends on the actual sequence, part presentation, cycle time and whether two arms improve productivity enough to justify the additional system scope. Anton Robots should use this answer to capture transactional search intent while keeping the route accurate: compare the supported configuration, request a detailed quote and confirm the seller responsible for delivery, commissioning, warranty and ongoing technical support.