DOBOT M1 Pro

The DOBOT M1 Pro price is normally available by quote through DOBOT and authorised partners rather than one official worldwide list price. The installed cost depends on gripper, vision, conveyor encoder, fixtures, safety, software, integration, training and support. A displayed arm price or used-market figure is not the final cost of a productive automation system. Buyers may also need a controller, teach pendant, end effector, dress pack, pedestal, guarding, safety equipment, software, integration, programming, shipping, taxes, commissioning, training, warranty and spare parts.

Before comparing offers, confirm the exact generation, reach, controller, environmental version, included equipment and support route. The better buying question is: what is included, what is excluded, and who guarantees the completed application?

You can request DOBOT M1 Pro pricing or a system review through Anton Robots before approving a budget.

You can buy or request the DOBOT M1 Pro through Anton Robots. Anton Robots helps buyers verify the exact robot, legitimate commercial route and complete automation package. M1 Pro is an active commercial DOBOT SCARA listed in the current product range and download centre.

Before buying or importing a unit, confirm the full model code, generation, controller, software, payload data, delivery country, warranty, spare parts and local service. A family name, old brochure or secondary-market listing does not always identify the same mechanical arm or supported controller generation. Professional buyers should compare the complete cell and integration responsibility rather than choosing only the lowest robot price. For collaborative equipment, also verify the task risk assessment and selected safety functions.

To start, request DOBOT M1 Pro buying or sourcing guidance through Anton Robots.

You can source a DOBOT M1 Pro through DOBOT, authorised partners, automation integrators and Anton Robots. Finding a DOBOT M1 Pro for sale is only the first step. Buyers should verify whether the offer is current, new, used, refurbished, incomplete, controller-only, arm-only or unsupported outside its original region. Confirm the robot, firmware, software, encoder interface, accessories, safety package, warranty and local support.

A useful comparison should cover the exact model code, serial number, manufacturing year, operating hours, controller, teach interface, cables, calibration status, service history, software licences, warranty and available parts. For used industrial robots, require a powered inspection and confirm that the selected integrator can recommission the system safely.

If you are looking for a DOBOT M1 Pro, contact Anton Robots. We can also compare it with other robots in the same category.

Yes. You can request a DOBOT M1 Pro quote through Anton Robots. A useful quotation should identify the exact robot and controller, end effector, payload and inertia assumptions, mounting structure, safety system, application software, fixtures, integration, commissioning, training and acceptance criteria. The proposal should define the part, conveyor, encoder, tool, cycle, reach, fixture, communications, safety, training and acceptance criteria.

Buyers should provide the destination country, workpiece, tool, required reach, cycle time, environment, process, production schedule and any existing machines or fieldbus systems. That information allows the supplier to verify load data and determine whether the proposed configuration is technically suitable. The quote should state who owns programming, risk assessment, documentation and production acceptance.

Anton Robots can help compare the DOBOT M1 Pro against other relevant robots. Buyers should obtain written confirmation of these points before approving a budget, purchase order, integration, safety file, or production deployment.

A typical DOBOT M1 Pro package normally includes the integrated four-axis robot, power equipment, communication hardware, software and selected teaching tools. The exact contents vary by country, seller, controller generation, configuration and product condition, so buyers should request a written list:

• DOBOT M1 Pro SCARA robot
• Power and communication equipment
• DobotStudio Pro and supported app
• Encoder and conveyor interface where selected
• Gripper, suction tool or dispenser
• Vision, fixture and sensor package
• Safety equipment, integration and training
• Shipping, warranty and local support

The gripper, vision, encoder hardware, conveyor and production fixtures are normally application-specific. A robot arm alone does not create a working automation cell. Tooling, guarding, fixtures, software, machine interfaces, safety validation and production testing can equal or exceed the hardware cost. For used equipment, backups, cables, calibration data and compatible software are especially important.

You can request an itemised DOBOT M1 Pro offer or availability review through Anton Robots before committing.

The DOBOT M1 Pro has a 1.5 kg payload and 400 mm working radius. The approximately 15.7 kg integrated body combines planar arm movement, 245 mm vertical travel and wrist rotation. The practical result depends on the exact model, controller, tool, load data, installation, environment and application rather than the headline specification alone. The payload includes the gripper, suction tool, camera, brackets, cables and workpiece, while vertical stroke and wrist rotation constrain the usable workspace.

Before purchase or integration, verify combined load, centre of gravity, vertical stroke, wrist rotation, fixture, path and process margin. A proper feasibility study should simulate or test the real tool, workpiece, paths, obstacles, process forces and cycle requirement instead of relying only on catalogue reach. It is best for lightweight high-speed planar automation.

You can request DOBOT M1 Pro application advice through Anton Robots and compare the complete system before purchase.

DOBOT specifies ±0.02 mm repeatability. Fast joint motion and the rigid SCARA architecture support short-cycle repetitive tasks. The practical result depends on the exact model, controller, tool, load data, installation, environment and application rather than the headline specification alone. Repeatability does not include fixture error, tool deflection, camera calibration, conveyor motion or thermal effects.

Before purchase or integration, verify process tolerance, payload, tool rigidity, fixture, vision calibration, conveyor accuracy and completed-cell measurement. A proper feasibility study should simulate or test the real tool, workpiece, paths, obstacles, process forces and cycle requirement instead of relying only on catalogue reach. Use a production acceptance test for the finished system.

You can request DOBOT M1 Pro application advice through Anton Robots and compare the complete system before purchase. Buyers should obtain written confirmation of these points before approving a budget, purchase order, integration, safety file, or production deployment.

The DOBOT M1 Pro suits pick and place, sorting, assembly, dispensing, inspection, testing and conveyor tracking. The platform is designed for small and medium-sized enterprises that need compact flexible automation. The practical result depends on the exact model, controller, tool, load data, installation, environment and application rather than the headline specification alone. A four-axis SCARA cannot reproduce arbitrary six-axis tool orientations and may be unsuitable for angled insertion, welding or complex machine access.

Before purchase or integration, verify required orientation, vertical stroke, payload, cycle time, part presentation, tool, fixtures and process force. A proper feasibility study should simulate or test the real tool, workpiece, paths, obstacles, process forces and cycle requirement instead of relying only on catalogue reach. Choose it when fast horizontal motion is more valuable than six-axis dexterity.

You can request DOBOT M1 Pro application advice through Anton Robots and compare the complete system before purchase.

The DOBOT M1 Pro supports hand-guided teaching, graphical programming, scripting, PC and mobile control. TCP/IP, Modbus TCP, Modbus RTU and controller I/O support integration with machines and line equipment. The practical result depends on the exact model, controller, tool, load data, installation, environment and application rather than the headline specification alone. The exact application, firmware, SDK and supported protocols depend on the original or Pro controller generation.

Before purchase or integration, verify software version, operating system, APIs, network, I/O, encoder support, backups, licences and integrator skills. A proper feasibility study should simulate or test the real tool, workpiece, paths, obstacles, process forces and cycle requirement instead of relying only on catalogue reach. Fix the software stack before approving multiple robots or a long-term course.

You can request DOBOT M1 Pro application advice through Anton Robots and compare the complete system before purchase.

Yes, the M1 Pro includes an encoder interface for dynamic conveyor tracking. The controller can coordinate robot motion with a moving conveyor for supported picking and sorting applications. The practical result depends on the exact model, controller, tool, load data, installation, environment and application rather than the headline specification alone. Tracking requires a compatible encoder, correct timing, part detection, coordinate calibration and a process that can tolerate conveyor variation.

Before purchase or integration, verify encoder type, controller interface, line speed, trigger, latency, part spacing, missed-part recovery and acceptance rate. A proper feasibility study should simulate or test the real tool, workpiece, paths, obstacles, process forces and cycle requirement instead of relying only on catalogue reach. Demonstrate the real conveyor and product before purchase.

You can request DOBOT M1 Pro application advice through Anton Robots and compare the complete system before purchase.

The DOBOT M1 Pro should be integrated as a risk-assessed industrial or collaborative SCARA application. DOBOT positions M1 Pro as a collaborative SCARA, but the full task must still be risk assessed. The practical result depends on the exact model, controller, tool, load data, installation, environment and application rather than the headline specification alone. Fast horizontal motion, end effectors, pinch points, moving conveyors and process equipment can require guarding, scanners or restricted access.

Before purchase or integration, verify risk assessment, speed, payload, stopping, tool hazards, protective devices, emergency stops and operator training. A proper feasibility study should simulate or test the real tool, workpiece, paths, obstacles, process forces and cycle requirement instead of relying only on catalogue reach. Safety is determined by the completed machine, not only the robot name.

You can request DOBOT M1 Pro application advice through Anton Robots and compare the complete system before purchase.

Choose M1 Pro for an integrated collaborative SCARA with conveyor tracking; choose MG400 for a compact desktop industrial arm with a 500 g rated payload and 440 mm reach. Both use DOBOT’s accessible software ecosystem, but their payload, mechanics, footprint and target applications differ. The practical result depends on the exact model, controller, tool, load data, installation, environment and application rather than the headline specification alone. The lower-cost or smaller robot is not automatically better if the tool, part or cycle exceeds its practical limits.

Before purchase or integration, verify payload, reach, vertical stroke, conveyor tracking, footprint, tool, cycle, safety, price and support. A proper feasibility study should simulate or test the real tool, workpiece, paths, obstacles, process forces and cycle requirement instead of relying only on catalogue reach. M1 Pro is the stronger choice for 1.5 kg line automation and dynamic tracking.

You can request DOBOT M1 Pro application advice through Anton Robots and compare the complete system before purchase.

The DOBOT M1 Pro is available internationally through DOBOT’s partner network. Delivery depends on the destination country, product status, freight method, export controls, customs, electrical standards, controller configuration and local service coverage. Confirm electrical standard, software region, authorised integrator, freight, customs, training, parts and warranty handling.

Before ordering, confirm who acts as importer of record, whether the controller and software are supported in the destination and who will install, calibrate, commission and validate the robot. Industrial and collaborative arms require suitable packaging, lifting, mounting and protection against transit damage. You can request international availability for the DOBOT M1 Pro through Anton Robots so the complete route can be checked.

Buyers should obtain written confirmation of these points before approving a budget, purchase order, integration, safety file, or production deployment. The selected supplier should record the final configuration, software version, support scope and acceptance criteria in the purchase documentation before commissioning.

DOBOT M1 Pro availability and delivery time can change according to the exact variant, controller, production allocation, seller inventory, refurbishment work and integration scope. Standard robots may be regionally available, while complete conveyor and production cells are configured to order. A robot appearing online should not automatically be treated as a complete locally stocked system.

Before committing to a production date, ask whether the quoted arm is built to order, physically in stock, used, refurbished or only subject to manufacturer confirmation. Lead time can also be affected by tooling, safety equipment, fixtures, software, freight, customs, commissioning and factory acceptance testing.

You can request current DOBOT M1 Pro availability through Anton Robots. Buyers should obtain written confirmation of these points before approving a budget, purchase order, integration, safety file, or production deployment.

Before buying the DOBOT M1 Pro, confirm the warranty or seller guarantee, covered components, controller and software entitlement, exclusions, service territory, parts availability and repair process. Confirm coverage for motors, screw axis, controller, software and third-party tooling plus onsite support. Ask these questions:

• Is the arm new, manufacturer-refurbished, integrator-refurbished, or sold as-is?
• Who supports the controller, drives, motors, encoders, cables and teaching device?
• Are backups, software licences and safety options included?
• What response time and spare-parts commitment applies to production failures?
• Who performs installation, risk assessment and application acceptance?
• How long will the exact generation remain serviceable in the destination country?

Lifecycle support can be more important than the initial hardware price. Contact Anton Robots to review the package before purchase. Buyers should obtain written confirmation of these points before approving a budget, purchase order, integration, safety file, or production deployment.

The DOBOT M1 Pro is worth considering if you need a compact current 1.5 kg SCARA for fast planar automation and accessible integration. Its strongest value comes from its ±0.02 mm repeatability, 400 mm reach, integrated construction, encoder interface and current software support.

However, the purchase only makes sense when the exact model, payload, reach, controller, environment and support match the application. It cannot provide arbitrary six-axis orientation or carry heavier tools and still requires a complete safety and application design. Buyers should compare complete installed cost, cycle time, expected uptime, energy, maintenance, integration risk and currently supported alternatives. For a production project, define measurable acceptance criteria before approving the cell rather than selecting a robot only by brand or nominal payload.

Compare other robots in the same category and request application advice through Anton Robots.