Find, compare and buy robots from top manufacturers
The CenoBots L4 is an AI-powered autonomous scrubber-dryer for commercial indoor facilities, with a 450 mm cleaning width, 38 L / 36 L tanks, 3D LiDAR navigation and up to 4.5 hours of runtime.
Get quotes in 24–48 hours
Verified suppliers & secure process
Transparent pricing & guidance
The CenoBots L4 is a mid-size autonomous scrubber-dryer for healthcare, education, retail and other commercial indoor facilities.
It uses a 450 mm cleaning path, 740 mm squeegee and approximately 20 kg of brush pressure, with about 38 L of solution capacity and 36 L of recovery capacity.
CenoBots publishes up to 4.5 hours of runtime and speeds up to 1.2 m/s, with an approximately 810 mm minimum passage width and 1,100 mm minimum turning width.
NVIDIA-based computing, 32-beam 3D LiDAR, depth cameras, stain perception and automatic map updates support autonomous navigation, while an optional 4-in-1 workstation can automate charging, clean-water refill, wastewater drainage and detergent refill.
Mid-size cleaning width balances productivity with access to tighter commercial spaces.
Commercial solution and recovery capacity supports longer autonomous routes.
32-beam 3D LiDAR and depth cameras support mapping and obstacle awareness.
Designed to clean within roughly 0–3 cm of wall surfaces.
Published runtime supports extended commercial cleaning cycles.
Optional station can automate charging, clean-water refill, wastewater drainage and detergent refill.
AI-powered autonomous cleaning robot
Autonomous hard-floor scrubbing with close-to-edge cleaning and vacuum recovery
Indoor commercial, healthcare, education and retail facilities
Current commercial L4 platform; 10.1-inch touchscreen, mobile app and optional 4-in-1 workstation for automatic charging, clean-water refill, wastewater drainage and detergent refill
No transport payload; approx. 38 L solution and 36 L recovery capacity on current commercial specifications
450 mm cleaning width; 740 mm squeegee; cleans within about 0–3 cm of wall surfaces
Autonomous wheeled mobility; up to 1.2 m/s; 810 mm minimum passage width; 1,100 mm minimum turning width
Disc-brush scrubbing with vacuum squeegee recovery; 20 kg published brush pressure
Up to 1.2 m/s
Up to 4.5 h
Rechargeable battery; approx. 2.7 h charging; published regional battery-capacity figures vary, so confirm the quoted unit
AI navigation with NVIDIA computing, stain perception, route planning, automatic map updates and mobile-app monitoring
32-beam 3D LiDAR with up to 150 m detection range, 3D depth cameras, bumper and safety sensing
820 × 615 × 1,075 mm
150 kg
Dusty Robotics FieldPrinter 2
CenoBots does not publish one universal price for the L4. Commercial cost depends on region, workstation, deployment, software, warranty and service.
You can request a CenoBots L4 quote through Anton Robots.
You can request the CenoBots L4 through Anton Robots or through CenoBots and its regional commercial channels.
Confirm workstation, battery configuration, commissioning, software and local support.
The L4 is an AI-powered autonomous scrubber-dryer for hard commercial floors.
CenoBots publishes a cleaning width of approximately 450 mm and a squeegee width of about 740 mm.
CenoBots promotes close-to-edge cleaning within approximately 0–3 cm of wall surfaces.
Current commercial specifications list approximately 38 L solution and 36 L recovery capacity.
CenoBots publishes runtime up to approximately 4.5 hours.
Actual runtime depends on pressure, water use, floor resistance and route complexity.
Current product material lists approximately 2.7 hours of charging.
Regional battery-capacity figures can vary, so confirm the quoted production unit.
CenoBots publishes maximum operating speed up to approximately 1.2 m/s.
The L4 is published with approximately 810 mm minimum passage width and about 1,100 mm minimum turning width.
The L4 uses NVIDIA-based AI computing, 32-beam 3D LiDAR, depth cameras, mapping and route planning.
It can update maps as the environment changes.
CenoBots publishes 32-beam 3D LiDAR, 3D depth cameras, bumper and safety sensing.
The optional 4-in-1 workstation can support automatic charging, clean-water refill, wastewater drainage and detergent refill.
Yes. CenoBots provides mobile-app monitoring and management functions for the L4 platform.
Check battery warranty, brushes, squeegee, water system, workstation, software access, spare parts and local technician coverage.
The L4 is worth considering for medium-to-large indoor hard-floor sites that need strong 3D perception, close-to-edge cleaning and optional automated servicing.
Compare it with other commercial cleaning robots using a site trial.
Tell us what you need. Our experts will help you find the right robot for your business.
Browse Robots
Humanoid Robots
Robot Dogs
Robotic Arms
Cobots
AMR Robots
AGV Robots
Service Robots
Companion Robots
