Allybot C2 Pro

Allybot does not publish one universal worldwide retail price for the C2 Pro. Commercial pricing depends on country, docking station, software, freight, commissioning, warranty and support.

You can request an Allybot C2 Pro quote through Anton Robots to compare the complete deployed package.

You can request the Allybot C2 Pro through Anton Robots, Allybot and regional commercial-robotics partners.

Before buying, confirm the docking station, battery and charger, software, mapping, training, warranty, spare parts and local service coverage.

C2 Pro is a current Allybot commercial cleaning robot and is normally supplied through a professional quotation process rather than consumer checkout.

If considering a reseller, ex-demo or used unit, verify battery health, software access, docking compatibility, service history and whether Allybot support transfers.

Yes. You can request an Allybot C2 Pro quote through Anton Robots. A useful proposal should include the robot, docking station, battery, software, delivery, commissioning, training, warranty and support.

Provide floor area, floor mix, route widths, operating hours, water and drainage access and destination country so the supplier can validate the deployment.

The exact package varies by supplier. The core C2 Pro combines wet and dry cleaning systems, autonomous navigation and a docking station designed for unattended servicing.

• Allybot C2 Pro robot
• Rechargeable battery and charging system
• Scrubbing, vacuuming, sweeping and mopping hardware
• Dual side brushes
• Docking station with water-service functions
• 4G/Wi-Fi software connectivity
• Deployment, training, warranty and support as quoted

C2 Pro supports scrubbing, vacuuming, sweeping and mopping. Allybot describes an auto-adjusting dual system for wet and dry waste that avoids manual replacement when changing between cleaning functions.

This makes it suitable for facilities with both hard floors and carpeted areas, subject to the exact surface and cleaning requirement.

Allybot publishes cleaning efficiency of approximately 500–800 m²/h.

The company positions C2 Pro for large spaces above roughly 2,000 m². Real output depends on floor mix, traffic, obstacles, station visits and cleaning intensity.

Allybot publishes a minimum edge clearance of zero and uses dual side brushes for edge cleaning.

Actual performance around shelving legs, irregular walls and tight corners should still be tested during a site demonstration.

The robot carries approximately 8 L of clean water and 8 L of wastewater. The docking station is listed with approximately 30 L / 30 L water capacity.

The station can refill and drain the robot repeatedly, reducing the need for large onboard tanks.

The docking station supports automatic charging, clean-water refill and wastewater drainage. Allybot markets this as a foundation for low-touch or 24/7 operation.

Sites without direct water access may also use a mobile water-tank approach depending on the local configuration. Confirm utilities and station options in the quote.

Allybot publishes a minimum navigable width of 75 cm. The robot itself measures approximately 506 × 506 × 660 mm.

Measure real aisle widths with shelving, displays, furniture and pedestrian traffic in place before deployment.

Allybot lists an adjustable speed of approximately 0.1–0.8 m/s and charging time of about 3.5 hours.

The manufacturer does not publish a clear universal runtime figure for C2 Pro on the current product page, so buyers should request the duty-cycle specification for their exact cleaning mode.

Allybot highlights advanced obstacle-avoidance and anti-fall technology to support safe autonomous navigation in commercial facilities.

The manufacturer does not publish a detailed complete sensor list on the current C2 Pro page, so do not infer specific sensor hardware that is not documented. Test stairs, glass, crowds and temporary obstacles onsite.

Allybot markets its cleaning robots internationally, but sales coverage, certification, software region, warranty and local field service vary by country.

Before importing, confirm battery shipping, electrical standards, docking-station compatibility, spare parts, consumables and onsite support.

Stock and lead time depend on region and docking configuration. Ask for written confirmation of robot availability, station delivery, installation and commissioning.

Check battery warranty, pumps, water-system components, brushes, filters, software updates, remote support and technician response times.

C2 Pro is worth considering for large indoor facilities that want one robot to handle wet and dry cleaning with minimal routine operator intervention. Its all-in-one cleaning, zero-edge brushes and automated water station are the main reasons to shortlist it.

If the site is small or cannot support a service station, a simpler compact robot may be more economical. Compare it with other commercial cleaning robots.