PUDU BG1 Pro

The PUDU BG1 Pro price is not published as one universal manufacturer MSRP for every country and package. A current Australian commercial listing prices BG1 Pro at approximately A$54,890 including GST. The amount should not be converted into a universal USD price without checking exchange rate, tax, freight, workstation and local service. Public prices should be treated as market references rather than guaranteed worldwide pricing because tax treatment, currency, freight, commissioning, accessories and service vary. The delivered cost may also include charging equipment, batteries, cleaning modules, mapping, software, subscriptions, plumbing, installation, training, warranty, spare parts, consumables and local field support.

Before comparing offers, confirm the exact model, whether the figure includes VAT or GST, which accessories are supplied, who performs site setup and what support is available after deployment. The better buying question is: what is included, what is excluded and what will the robot cost to operate at the real site?

You can request current PUDU BG1 Pro pricing and an itemised commercial review through Anton Robots.

You can buy or request the PUDU BG1 Pro through Anton Robots, authorised PUDU partners and regional commercial-cleaning robot suppliers. PUDU launched BG1 Pro in March 2026 as the higher-perception, higher-speed version of the BG1 Series.

Before buying, renting, leasing or importing a unit, confirm the exact model, regional certification, included hardware, software access, charger or workstation, shipping, taxes, warranty, consumables, spare parts and technical support. A product page or distributor listing does not always mean that the same configuration is available for immediate supported delivery in every country. Professional buyers should compare the complete operational package and support route rather than only the lowest displayed price. The supplier should explain site mapping, commissioning, operator training, maintenance and performance acceptance.

To start, request PUDU BG1 Pro buying, availability or deployment guidance through Anton Robots.

You can find the PUDU BG1 Pro for sale through authorised PUDU distributors, cleaning-equipment integrators and marketplaces such as Anton Robots. Finding a listing is only the first step.

Buyers should verify whether the unit is new, used, refurbished, ex-demo, subscription-based, allocated to a pilot or unsupported outside its original region. Confirm the model code, battery condition, cleaning assemblies, charger or workstation, software account, serial number, warranty, training and local service. A third-party listing should not be treated as proof that manufacturer software, spare parts or support will transfer to a new owner. A useful comparison should cover delivery country, expected lead time, included consumables, commissioning, performance testing and who supports the robot after installation.

If you are looking for a PUDU BG1 Pro, contact Anton Robots and compare it with other commercial cleaning robots.

Yes. You can request a PUDU BG1 Pro quote through Anton Robots. A useful proposal should identify the exact robot, ownership or service structure, included cleaning equipment, charger or workstation, software, shipping assumptions, taxes, warranty, delivery estimate, training and local support.

The buyer should provide the destination country, the large hard-floor area, ceiling height, lighting and interference conditions, traffic, spill profile, required speed, edge-cleaning demand, chemical policy, ride-on use and workstation utilities, operating hours, floor plans, route widths, doors, lifts, network conditions and required launch date. The proposal should define who maps and commissions the site, what cleaning result is expected, how exceptions are handled and which performance is guaranteed. It should also separate the purchase price from recurring consumables, software, maintenance and service costs.

Anton Robots can help compare the PUDU BG1 Pro against other service robots and determine whether a pilot or site survey is required before purchase.

A typical PUDU BG1 Pro package may include the following equipment, although the exact contents vary by country, supplier and commercial structure:

• PUDU BG1 Pro large scrubber-dryer robot
• 48 V 90 Ah battery platform and charging equipment
• 3D LiDAR and 3D VSLAM perception system
• Front sweeping roller and 550 mm scrub system
• Extendable edge-cleaning brush
• Squeegee, disc brushes, pads and replaceable rubber components specified by the supplier
• 75 L clean-water, 60 L wastewater and approximately 7 L dual-agent tanks
• PUDU Link, mapping and operator tools specified by the supplier

The all-in-one workstation, dust-mopping or polishing consumables, e-gate and elevator integrations and additional batteries are optional unless written into the offer. Ask for a written packing list and service scope before placing an order. Hardware, software and deployment services are often separated in commercial robotics purchases, and a low headline price may exclude the charger, workstation, spare battery, mapping, installation, training, consumables or warranty handling needed for practical operation. Confirm which brushes, pads, squeegees, filters, bags, chemicals and replacement parts are supplied for the first operating period.

You can request an itemised PUDU BG1 Pro offer through Anton Robots.

The PUDU BG1 Pro adds 3D LiDAR and a higher maximum cruise speed to the standard BG1 platform. BG1 Pro uses 3D LiDAR plus 3D VSLAM fusion positioning and reaches up to 1.2 m/s, while BG1 uses conventional LiDAR plus 3D VSLAM and reaches up to 1.0 m/s.

Both publish the same 90 Ah battery, 7.5-hour runtime, 75 L and 60 L tanks, 550 mm scrub width, cleaning productivity, AI Magic Cleaning and optional workstation support. The Pro premium is most relevant in high-ceiling, low-light, interference-prone or highly dynamic facilities where enhanced three-dimensional perception and faster relocation create operational value. Buyers should compare the exact regional packages and pilot both if the site is difficult.

BG1 Pro combines 3D LiDAR with 3D VSLAM fusion positioning to build a richer spatial understanding than the standard BG1’s LiDAR configuration. PUDU positions the enhanced perception for stable mapping and localisation in high-clearance, nighttime and high-interference environments.

It can improve recognition of obstacles and complex geometry, but it is not a guarantee of flawless operation. Forklifts, glass, reflective surfaces, hanging objects, pallets, dense crowds and rapidly changing layouts still require testing.

The value of 3D LiDAR depends on whether the site actually creates perception challenges. A pilot should compare localisation stability, intervention rate and route completion under normal traffic and lighting, rather than selecting Pro only from the specification sheet.

PUDU lists the BG1 Pro at up to 2,000 m² per hour in covered-cleaning mode and up to 6,000 m² per hour in spot-cleaning mode. It uses a 550 mm scrub width or 708 mm with side brushes.

The 1.2 m/s maximum cruise speed can reduce relocation time, but cleaning speed is governed by floor condition, brush pressure, safety and water recovery. Spot mode detects and targets messes and should not be compared directly with full-coverage scrubbing. A business case should use accepted cleaned area per shift, not only theoretical square metres. Measure edge follow-up, spill response, intervention rate, water use and drying quality during the site pilot.

BG1 Pro is specified for up to 7.5 hours of sweeping and scrubbing from its 48 V 90 Ah battery platform. Charging takes approximately three hours where AC supply is at least 180 V and about 4.5 hours on lower-voltage supply.

Actual runtime varies with speed, brush pressure, water flow, chemical dosing, floor resistance, perception load and obstacle frequency. The robot carries 75 L of clean water, 60 L of wastewater, a 5 L debris bin and about 7 L of cleaning agents, so water or debris servicing may determine shift length before the battery does. Confirm local electrical compatibility, charger inclusion, battery warranty and workstation cycle time.

PUDU’s AI Magic Cleaning coordinates proactive spot cleaning, automatic chemical dosing and adaptive cleaning mechanisms. Wide-field AI vision can identify spills or dirt and direct the robot to respond in real time.

If a wet spill is detected, the sweeper can retract to avoid spreading liquid; if a stubborn stain is detected, brush pressure can increase. Dual agent tanks provide millilitre-level dosing and adjust chemical strength to floor conditions. Buyers should verify the supported dirt categories, chemical compatibility, data and reporting functions and performance under the site’s lighting. Hazardous spills, unknown chemicals and safety-critical contamination still need human procedures and should not be delegated solely to AI detection.

The BG1 Pro uses an extendable scrubbing brush that physically reaches toward walls and shelving edges to reduce the uncleaned strip left by large scrubber-dryers. PUDU also promotes automatic disc-brush attachment and tool-free replacement of critical consumables, with routine brush or squeegee service designed to take under one minute.

Actual edge results depend on wall shape, shelving legs, corners, route calibration and obstruction. Operators still need to empty the debris bin, inspect blades and brushes, clean sensors and remove wrapped material. A pilot should mark representative edges and measure the remaining manual touch-up. Consumable prices and expected life should be included in the total cost of ownership.

The optional all-in-one workstation supports automatic charging, clean-water refill, wastewater drainage and continuous operational cycles. Ride-on mode allows staff to relocate the 344 kg platform, build maps or intervene manually across large facilities.

BG1 Pro supports 4G, Wi-Fi and Bluetooth, with optional e-gate and elevator communication and PUDU Link management. The station needs utilities, drainage, backflow protection, network coverage and clear docking space. Integration scope, cybersecurity, account ownership and building-system responsibilities should be defined before purchase. Even with the station, the site needs staff for debris, consumables, inspection and exception recovery. Verify local rules for ride-on operation and pedestrian interaction.

The PUDU BG1 Pro may be available for international delivery through PUDU and its regional partner network, but availability, certification, service coverage and lead time vary by country. Before importing a robot, confirm electrical standards, battery-shipping requirements, customs classification, taxes, local safety obligations, wireless approvals, language support, software region, warranty validity and access to spare parts.

Commercial cleaning robots normally require more than freight delivery: the site may need mapping, commissioning, operator training, network setup, consumable supply and a defined repair route. Ask who will provide onsite support and how long replacement parts normally take to arrive. A robot bought outside the intended region may have limited warranty or cloud access.

Request a PUDU BG1 Pro international availability review through Anton Robots before committing to an import.

The PUDU BG1 Pro is a current commercial product, but stock and delivery time depend on country, configuration, battery allocation, accessories, workstation requirements and local commissioning capacity. BG1 Pro is a newly launched 2026 product, so initial stock may be held as demonstration, distributor or project inventory rather than broad retail supply.

Do not assume that a visible product page means the exact unit is sitting in a local warehouse. Ask the supplier to confirm whether the robot is in stock, incoming, built to order or allocated after a site survey. The written proposal should separate manufacturing or warehouse lead time, international freight, customs, local delivery, mapping, installation and acceptance testing.

If the robot is needed for a fixed launch, event or contract date, obtain a written delivery plan and contingency. Request current PUDU BG1 Pro stock and lead-time information through Anton Robots.

Before purchasing or deploying the PUDU BG1 Pro, check the hardware warranty, battery coverage, cleaning-component exclusions, software support period, response times, preventive maintenance, spare-parts availability and repair process. Confirm coverage for the 3D LiDAR, 3D vision cameras, AI compute system, battery, drive platform, pumps, automatic dosing, extendable brush, tanks, squeegee and optional workstation.

Brushes, pads, squeegees, filters, dust bags, tyres and other wear items are normally treated differently from the main robot. Ask whether support is remote, onsite or delivered through a regional partner, and who pays freight or technician travel. The agreement should state what happens if the robot arrives damaged, cannot complete the agreed routes or is unavailable during a critical cleaning period.

For professional buyers, the quality of local support can affect lifetime value more than a small difference in purchase price. Contact Anton Robots to review the proposed warranty and service package before committing.

The PUDU BG1 Pro is worth considering when a large and complex facility benefits from 3D LiDAR perception, higher 1.2 m/s travel speed, proactive cleaning and optional 24/7 workstation cycles. Its value depends on matching the robot to a repeatable workflow, realistic floor conditions and an operating team rather than buying it only because autonomous cleaning is attractive. The strongest business case normally includes measurable labour, coverage, consistency, safety or scheduling benefits and a clear plan for daily maintenance and exception handling. It may be a weak investment when the site does not need the perception upgrade, has narrow routes, small floor area or cannot support large-machine servicing and utilities.

Buyers should compare the complete cost of ownership, including accessories, software, installation, consumables, maintenance, batteries and internal staff time. A representative pilot should measure acceptable cleaned area per shift, intervention rate, water and chemical use, drying quality and uptime. Compare it with the standard PUDU BG1, PUDU MT1 or CC1, KEENON C55, LionsBot R12 Rex Scrub or conventional ride-on cleaning machines before deciding.

You can review other commercial cleaning robots through Anton Robots.