KEENON KLEENBOT C55

The KEENON KLEENBOT C55 price is not published as one universal manufacturer MSRP for every country and package. Current European public listings are around €19,999 excluding VAT or approximately €23,500–23,799 including VAT, depending on seller and package. Workstation, extra batteries, installation, training and service can materially change the total project cost. Public prices should be treated as market references rather than guaranteed worldwide pricing because tax treatment, currency, freight, commissioning, accessories and service vary. The delivered cost may also include charging equipment, batteries, cleaning modules, mapping, software, subscriptions, plumbing, installation, training, warranty, spare parts, consumables and local field support.

Before comparing offers, confirm the exact model, whether the figure includes VAT or GST, which accessories are supplied, who performs site setup and what support is available after deployment. The better buying question is: what is included, what is excluded and what will the robot cost to operate at the real site?

You can request current KEENON KLEENBOT C55 pricing and an itemised commercial review through Anton Robots.

You can buy or request the KEENON KLEENBOT C55 through Anton Robots, authorised KEENON partners and regional commercial-cleaning robot suppliers. KEENON currently lists C55 as its medium-to-large-space professional cleaning platform.

Before buying, renting, leasing or importing a unit, confirm the exact model, regional certification, included hardware, software access, charger or workstation, shipping, taxes, warranty, consumables, spare parts and technical support. A product page or distributor listing does not always mean that the same configuration is available for immediate supported delivery in every country. Professional buyers should compare the complete operational package and support route rather than only the lowest displayed price. The supplier should explain site mapping, commissioning, operator training, maintenance and performance acceptance.

To start, request KEENON KLEENBOT C55 buying, availability or deployment guidance through Anton Robots.

You can find the KEENON KLEENBOT C55 for sale through authorised KEENON distributors, cleaning-equipment integrators and marketplaces such as Anton Robots. Finding a listing is only the first step.

Buyers should verify whether the unit is new, used, refurbished, ex-demo, subscription-based, allocated to a pilot or unsupported outside its original region. Confirm the model code, battery condition, cleaning assemblies, charger or workstation, software account, serial number, warranty, training and local service. A third-party listing should not be treated as proof that manufacturer software, spare parts or support will transfer to a new owner. A useful comparison should cover delivery country, expected lead time, included consumables, commissioning, performance testing and who supports the robot after installation.

If you are looking for a KEENON KLEENBOT C55, contact Anton Robots and compare it with other commercial cleaning robots.

Yes. You can request a KEENON KLEENBOT C55 quote through Anton Robots. A useful proposal should identify the exact robot, ownership or service structure, included cleaning equipment, charger or workstation, software, shipping assumptions, taxes, warranty, delivery estimate, training and local support.

The buyer should provide the destination country, the hard-floor area, debris and stain types, required brush pressure, route and doorway widths, speed bumps, water infrastructure, battery schedule and unattended-operation target, operating hours, floor plans, route widths, doors, lifts, network conditions and required launch date. The proposal should define who maps and commissions the site, what cleaning result is expected, how exceptions are handled and which performance is guaranteed. It should also separate the purchase price from recurring consumables, software, maintenance and service costs.

Anton Robots can help compare the KEENON KLEENBOT C55 against other service robots and determine whether a pilot or site survey is required before purchase.

A typical KEENON KLEENBOT C55 package may include the following equipment, although the exact contents vary by country, supplier and commercial structure:

• KLEENBOT C55 industrial cleaning robot
• Battery configuration and charging equipment
• Triple-roller sweeping and scrubbing assembly
• 550 mm scrub deck and squeegee recovery system
• 60 L clean-water and 47 L wastewater tanks
• 2 L front and 0.7 L rear debris containers
• Manual-assist handle and autonomous navigation equipment
• App or web task management specified by the supplier

The automatic charging, clean-water and wastewater workstation is an optional infrastructure package unless explicitly included. Confirm the number of hot-swap batteries and consumable sets. Ask for a written packing list and service scope before placing an order. Hardware, software and deployment services are often separated in commercial robotics purchases, and a low headline price may exclude the charger, workstation, spare battery, mapping, installation, training, consumables or warranty handling needed for practical operation. Confirm which brushes, pads, squeegees, filters, bags, chemicals and replacement parts are supplied for the first operating period.

You can request an itemised KEENON KLEENBOT C55 offer through Anton Robots.

The KEENON KLEENBOT C55 integrates sweeping and scrubbing in one pass, followed by vacuum recovery and squeegee drying. KEENON describes an industry-first triple-roller arrangement that combines a sweeper and scrubber, separating dry debris from wet cleaning and reducing the need for two separate machines.

It is designed for compatible indoor hard floors in factories, logistics hubs, shopping centres, transport facilities, parking areas and other large sites. The robot is not a carpet extractor, outdoor pressure washer or universal spill-response machine. Brushes, water flow, detergent and speed should be validated for the actual concrete, epoxy, tile, stone or coated floor. Manual detailing remains necessary for corners, stairs and inaccessible areas.

KEENON publishes a maximum theoretical cleaning efficiency of 2,376 m² per hour and a 550 mm scrubbing width excluding the side brush. The theoretical figure is useful for comparing platforms but should not be treated as guaranteed finished output.

Net productivity depends on route overlap, debris, stain treatment, obstacles, water service, battery changes, speed limits, safety stops and required floor dryness. The large tanks and hot-swap design can reduce interruptions, but only if staff or the workstation can service the machine efficiently. A pilot should measure acceptable completed area per shift, water consumption, missed edges, intervention frequency and downtime in realistic traffic.

KEENON lists a maximum runtime of up to five hours and a charging time of approximately four hours. The C55 uses dual battery compartments that support rapid hot swapping, promoted as a five-second replacement while the system remains powered. Actual runtime varies with brush pressure, suction, floor resistance, speed, water use, obstacles and battery age.

Buyers should confirm how many batteries are included and whether an operator or workstation will manage extended shifts. A hot-swap capability is valuable only when charged spare batteries, safe handling procedures and storage are available. Ask for battery warranty, replacement cost and charging-infrastructure requirements.

The C55 carries a 60 L clean-water tank and a 47 L wastewater tank, plus a 2 L front debris container and a 0.7 L rear debris container. KEENON positions the large clean-water capacity as reducing refill frequency across extensive sites. Tank size does not remove daily maintenance: operators still need to manage debris, inspect rollers, clean the squeegee, check filters and prevent wastewater odour. The patented tank arrangement can be flipped for easier access to pumps and pipework.

Buyers should confirm approved chemicals, water quality requirements, drainage procedures and how full tanks affect route planning. Include detergent, blades, rollers and wear parts in the operating budget.

The C55’s triple-roller system combines front-end sweeping with wet scrubbing so dry debris and floor washing can occur in one autonomous pass. This dry-wet separation is intended to avoid pushing loose material through the scrub circuit and to improve cleaning compared with a conventional dual-roller scrubber.

Performance depends on debris type, brush selection, down pressure, water flow and travel speed. Large objects, string, packaging material, oil, metal swarf or hazardous spills may require manual removal before the robot enters the area. During a pilot, inspect debris pickup, scrub quality, water recovery and roller fouling. The operator needs a defined process for cleaning rollers and removing wrapped material after each shift.

The optional C55 workstation can connect to building utilities to support automatic charging, clean-water supply and wastewater drainage.

Together with app or web task management, remote dispatch, status monitoring and cleaning reports, it can reduce manual servicing and support longer unattended schedules. The workstation requires suitable power, potable or approved water, drainage, backflow protection, network coverage and clear docking space.

Buyers should confirm whether detergent dosing, self-cleaning or battery management are included, because station functions can vary by package. Plumbing and facility work should be priced separately. A blocked dock, failed water connection or full debris container still requires human intervention, so unattended does not mean maintenance-free.

The C55 combines a top-mounted LiDAR with four stereo cameras for 360-degree real-time perception, route planning and obstacle response. KEENON also states that the chassis can cross speed bumps up to 50 mm and that the robot can switch between manual and autonomous operation using an assist handle.

These capabilities should be tested on the real site. Forklifts, pallets, crowds, reflective surfaces, low objects, ramps, floor edges and changing warehouse layouts can reduce productivity or require exclusion zones. The safety plan should define robot routes, pedestrian interaction, emergency stopping, manual recovery and operating times. Sensors and cameras need regular cleaning, particularly in dusty industrial environments.

The KEENON KLEENBOT C55 may be available for international delivery through KEENON and its regional partner network, but availability, certification, service coverage and lead time vary by country. Before importing a robot, confirm electrical standards, battery-shipping requirements, customs classification, taxes, local safety obligations, wireless approvals, language support, software region, warranty validity and access to spare parts.

Commercial cleaning robots normally require more than freight delivery: the site may need mapping, commissioning, operator training, network setup, consumable supply and a defined repair route. Ask who will provide onsite support and how long replacement parts normally take to arrive. A robot bought outside the intended region may have limited warranty or cloud access.

Request a KEENON KLEENBOT C55 international availability review through Anton Robots before committing to an import.

The KEENON KLEENBOT C55 is a current commercial product, but stock and delivery time depend on country, configuration, battery allocation, accessories, workstation requirements and local commissioning capacity. Some European distributors currently advertise immediate or short-lead availability, while other regions use project-based allocation and local installation.

Do not assume that a visible product page means the exact unit is sitting in a local warehouse. Ask the supplier to confirm whether the robot is in stock, incoming, built to order or allocated after a site survey. The written proposal should separate manufacturing or warehouse lead time, international freight, customs, local delivery, mapping, installation and acceptance testing.

If the robot is needed for a fixed launch, event or contract date, obtain a written delivery plan and contingency. Request current KEENON KLEENBOT C55 stock and lead-time information through Anton Robots.

Before purchasing or deploying the KEENON KLEENBOT C55, check the hardware warranty, battery coverage, cleaning-component exclusions, software support period, response times, preventive maintenance, spare-parts availability and repair process. Confirm coverage for the dual-battery system, drive chassis, LiDAR and stereo cameras, pumps, tanks, triple rollers, vacuum motor, squeegee and optional plumbing workstation.

Brushes, pads, squeegees, filters, dust bags, tyres and other wear items are normally treated differently from the main robot. Ask whether support is remote, onsite or delivered through a regional partner, and who pays freight or technician travel. The agreement should state what happens if the robot arrives damaged, cannot complete the agreed routes or is unavailable during a critical cleaning period.

For professional buyers, the quality of local support can affect lifetime value more than a small difference in purchase price. Contact Anton Robots to review the proposed warranty and service package before committing.

The KEENON KLEENBOT C55 is worth considering when a medium-to-large facility needs autonomous one-pass sweeping and scrubbing, large tanks and long productive shifts. Its value depends on matching the robot to a repeatable workflow, realistic floor conditions and an operating team rather than buying it only because autonomous cleaning is attractive. The strongest business case normally includes measurable labour, coverage, consistency, safety or scheduling benefits and a clear plan for daily maintenance and exception handling. It may be a weak investment when the site has narrow corridors, mostly carpet, small floor area or no ability to service large water tanks and batteries.

Buyers should compare the complete cost of ownership, including accessories, software, installation, consumables, maintenance, batteries and internal staff time. A representative pilot should measure acceptable cleaned area per shift, intervention rate, water and chemical use, drying quality and uptime. Compare it with the KEENON C40, PUDU BG1 Series, LionsBot R12 Rex Scrub, Gausium large-area cleaners or conventional ride-on scrubbers before deciding.

You can review other commercial cleaning robots through Anton Robots.