Husqvarna DXR 300

The Husqvarna DXR 300 price is normally available by quote, and public regional pricing is not consistent enough to use as one global figure. The final cost can change according to country, configuration, installation, freight, taxes, regulatory requirements, warranty, service coverage, training, accessories, software, and the work required to make the system operational. A headline price rarely represents the complete deployed cost.

Buyers should ask whether the proposal includes the tracked demolition robot, radio remote, charger or remote batteries, hydraulic tool connections, selected breaker or crusher, outriggers, manuals, transport equipment, and commissioning support, and whether commissioning, operator training, maintenance, spare parts, validation, and ongoing technical support are included or quoted separately. This is especially important for demolition contractors, concrete-cutting companies, construction groups, industrial maintenance teams, mining operators, and specialist rental fleets, where an incomplete package can create delays, compliance problems, or a system that cannot perform the intended workflow. The safer comparison is the total supported project rather than the base machine alone.

You can request a Husqvarna DXR 300 quote through Anton Robots to compare the available configuration, delivery assumptions, support position, and alternatives before purchasing.

You can buy, source, or request commercial guidance for the Husqvarna DXR 300 through Anton Robots. The correct route depends on its market status: the DXR 300 is an earlier-generation model that remains visible in some regional Husqvarna catalogues, while the current global range prominently features the DXR 305; availability therefore needs regional confirmation. Anton Robots helps buyers identify the appropriate manufacturer, authorised channel, specialist supplier, integrator, franchise route, refurbishment source, or current alternative, then compare what is actually included. The Husqvarna DXR 300 may also be available through Husqvarna Construction, regional dealers, demolition-equipment specialists, used-equipment sellers, and contractors rotating fleet assets, but two offers carrying the same product name may cover very different hardware, software, service, training, installation, and warranty terms.

Before buying, confirm the exact model or generation, serial or revision where relevant, included components, regional approvals, delivery timing, service responsibility, and whether the system is suitable for the intended use. For demolition contractors, concrete-cutting companies, construction groups, industrial maintenance teams, mining operators, and specialist rental fleets, total package quality and long-term support are normally more important than the lowest advertised amount.

Start with a request through Anton Robots so the buying route and complete package can be checked.

You can look for a Husqvarna DXR 300 for sale through Husqvarna Construction, regional dealers, demolition-equipment specialists, used-equipment sellers, and contractors rotating fleet assets and specialist marketplaces such as Anton Robots. Availability must be interpreted carefully because the DXR 300 is an earlier-generation model that remains visible in some regional Husqvarna catalogues, while the current global range prominently features the DXR 305; availability therefore needs regional confirmation. A listing may describe a new system, remaining inventory, a demonstration unit, a used or refurbished unit, a project deployment, or only one component of a larger installation.

Before treating a listing as comparable, verify the exact configuration, operating condition, included software and tools, documentation, service history, warranty, regulatory status, and whether installation or commissioning is required. For professional buyers, the key question is not simply whether a Husqvarna DXR 300 appears online, but whether it can be delivered, supported, and used legally and safely for the intended workflow. Missing controllers, licences, instruments, attachments, calibration tools, or service coverage can materially change value.

If you find a Husqvarna DXR 300 for sale, contact Anton Robots to review the offer and compare it with current alternatives before committing.

Yes. You can get a quote for the Husqvarna DXR 300 through Anton Robots. A useful quotation should describe the exact DXR 300 variant, 22 kW power configuration, compatible attachment, radio remote, transport arrangement, commissioning, service, and any hazardous-environment options, not merely name the base product. It should also identify what is excluded, the expected delivery or project schedule, site responsibilities, warranty terms, service response, training, consumables or accessories, and any regional compliance conditions.

This matters because the final cost of a professional robot or automated system often depends more on the complete application than on the machine itself. A lower proposal may exclude critical equipment, while a higher proposal may include integration, commissioning, support, and a configuration that is ready for the intended task. Buyers should provide the country, facility, workflow, expected volume, environment, users, and required outcomes so the supplier can size the project correctly.

Anton Robots can help compare the Husqvarna DXR 300 with other relevant robots and request an itemised proposal based on the real use case.

What is included with the Husqvarna DXR 300 depends on the seller, generation, country, and project configuration. A typical proposal may include the tracked demolition robot, radio remote, charger or remote batteries, hydraulic tool connections, selected breaker or crusher, outriggers, manuals, transport equipment, and commissioning support, but buyers should never assume that every offer contains the same components. Ask for a written packing list, software list, service scope, and responsibilities matrix before ordering. Important items may be optional, supplied by an integrator, or tied to a service agreement.

Confirm whether freight, installation, site preparation, commissioning, training, validation, warranty, maintenance, spare parts, and technical support are included. For a used or legacy system, confirm serial numbers, operating condition, remaining serviceability, compatible accessories, and whether licences or software can legally transfer. For a current regulated or industrial platform, confirm the authorised purchasing route and local documentation. Two offers can use the same product name while representing very different operational packages.

You can request an itemised Husqvarna DXR 300 package through Anton Robots and compare the total delivered system rather than the headline machine.

The main Husqvarna DXR 300 specifications are 22 kW rated input power, 5.2 m upward reach, approximately 1,960 kg machine weight, and up to 75 l/min hydraulic oil flow. These figures position it as a compact but powerful remote demolition machine for concrete breaking, crushing, dismantling, refractory removal, and work in spaces where a conventional excavator may be too large or expose the operator to unnecessary risk. Reach and tool performance depend on the attachment, machine position, outriggers, material, and working angle. The robot’s weight also matters for floors, transport, lifting plans, and access routes.

Buyers should not size a demolition robot only from motor power. Confirm the required breaker or crusher, impact energy, hydraulic flow, jaw capacity, access width, slope, floor loading, ventilation, and debris-removal plan. A site survey should establish whether the DXR 300 can reach the work safely and whether the structure can support it.

Request sizing advice through Anton Robots before selecting a machine and attachment.

The Husqvarna DXR 300 is suitable for remote demolition and dismantling in controlled construction and industrial environments. Common uses include breaking reinforced concrete, removing refractory lining, dismantling walls and floors, working inside factories, performing renovation strip-out, and accessing confined or hazardous areas where keeping the operator away from the tool improves the working method. Its tracked undercarriage, stabilisers, articulated arm, and hydraulic attachment interface make it more versatile than a fixed breaker. It is not a general autonomous robot: a trained operator actively controls the machine and remains responsible for positioning, stability, tool selection, exclusion zones, and site safety. Productivity depends on concrete strength, reinforcement, dust control, attachment, debris management, access, and the ability to reposition the robot.

Before purchase, compare the task with the DXR 305 and other demolition robots, then confirm power supply, floor capacity, access, lifting, ventilation, and tool requirements. Anton Robots can help structure that comparison.

Buyers should document the intended workflow, confirm the exact configuration in writing, and compare the complete delivered and supported package rather than relying on a product name or headline price. Anton Robots can help organise those questions before a procurement decision is made for the Husqvarna DXR 300.

The DXR 300 can use different demolition attachments, including hydraulic breakers, crushers, shears, buckets, and specialist tools approved for the machine and required flow range. The correct tool depends on whether the task is impact breaking, concrete crushing, cutting steel, excavating loose material, scaling, or removing refractory. Attachment weight and hydraulic demand affect stability, reach, speed, and permitted working positions. A larger tool is not automatically more productive if it reduces manoeuvrability or exceeds the application envelope.

Buyers should confirm the exact tool model, mounting interface, oil flow, pressure, jaw opening or impact energy, hoses, couplings, consumables, and service requirements. Dust-reduction equipment may also be important for indoor demolition. Ask whether the quoted system includes the tool or only the base robot, because attachments can represent a material part of the project cost. Anton Robots can help request an itemised DXR 300 package with the correct attachment rather than comparing robot-only offers.

Buyers should document the intended workflow, confirm the exact configuration in writing, and compare the complete delivered and supported package rather than relying on a product name or headline price. Anton Robots can help organise those questions before a procurement decision is made for the Husqvarna DXR 300.

Yes, the Husqvarna DXR 300 can be useful in confined indoor demolition because it is significantly more compact than a conventional excavator with comparable demolition intent and can be operated remotely. It can pass through many industrial access routes and work in factories, basements, process plants, tunnels, and renovation sites where visibility, fumes, heat, falling material, or restricted space make manual work difficult.

However, indoor suitability is not automatic. The project must check doorway and corridor dimensions, turning space, floor loading, stairs or ramps, three-phase electrical supply, ventilation, dust and silica controls, noise, water management, debris removal, fire protection, and safe escape routes. The radio link and operator position must remain reliable, and exclusion zones must account for flying fragments and structural instability. In sensitive buildings, vibration and load transfer may also need engineering review. A site survey should be completed before procurement so the robot, attachment, and work method are selected together.

Buyers should document the intended workflow, confirm the exact configuration in writing, and compare the complete delivered and supported package rather than relying on a product name or headline price. Anton Robots can help organise those questions before a procurement decision is made for the Husqvarna DXR 300.

The Husqvarna DXR 300 can be worth buying for contractors that have recurring high-risk or confined demolition work and can keep the machine productive. Its strengths are remote operation, a strong power-to-weight profile, 5.2 m reach, attachment flexibility, and the ability to work where larger equipment may be impractical.

Ownership can reduce dependence on manual breakers and improve the operator’s distance from heat, falling debris, vibration, and unstable structures. The business case still depends on utilisation, attachment costs, transport, trained operators, service access, hydraulic maintenance, consumables, and local demand.

Because the DXR 300 is an earlier generation and the DXR 305 is prominent in the current range, buyers should compare parts support, dealer coverage, controls, cooling, performance, and resale value before choosing. A used DXR 300 may be attractive when condition and service history are strong; a newer model may be safer for long-term fleet use. Anton Robots can help compare the complete ownership case.

The DXR 300 and DXR 305 occupy a similar class, but the DXR 305 is the newer model in Husqvarna’s current global line. The DXR 300 is listed with 22 kW rated input power, 5.2 m upward reach, around 1,960 kg weight, and 75 l/min hydraulic flow. The current DXR 305 is listed at 27 kW, the same 5.2 m upward reach, approximately 2,050 kg or more depending on variant, and up to 85 l/min flow.

Those figures suggest more hydraulic and motor capacity in the newer platform, but the right purchase also depends on attachment compatibility, access, transport weight, regional stock, service, operator preference, and acquisition cost. Existing fleets may value common parts and familiar controls, while a new buyer may prioritise current support and future availability.

Ask the supplier to compare exact variants rather than assuming every DXR 300 or DXR 305 package is identical. Anton Robots can help request a side-by-side proposal.

The DXR 300 is remote-controlled rather than autonomous. The operator uses a radio remote to drive the tracks, deploy stabilisers, position the arm, and control the hydraulic attachment while observing the work from a safer location. Remote operation can improve visibility and distance from dust, vibration, heat, falling material, and unstable structures, but it does not remove the need for judgement or site controls.

The operator must understand machine stability, load charts, attachment behaviour, structural hazards, emergency stops, communication loss, exclusion zones, and safe recovery. Radio performance can be affected by the environment, steel structures, distance, and line of sight, so the operating position should be tested. A spotter or additional supervision may be required in complex sites.

Buyers should confirm the remote, batteries, charger, harness, display condition, firmware, emergency-stop function, and replacement availability, particularly on used machines. Training should be included in the deployment plan. Buyers should document the intended workflow, confirm the exact configuration in writing, and compare the complete delivered and supported package rather than relying on a product name or headline price. Anton Robots can help organise those questions before a procurement decision is made for the Husqvarna DXR 300.

The DXR 300 can support work in hazardous industrial environments when the machine, options, attachment, and work method are appropriate. Remote control helps separate the operator from hot areas, unstable structures, dust, falling debris, vibration, and confined access. Applications may include cement plants, process facilities, foundries, tunnels, refractory removal, and decommissioning. This does not make the standard machine suitable for every hazardous atmosphere.

Explosive gases, combustible dust, radiation, extreme heat, contamination, electrical hazards, and restricted ventilation can require specialist options, permits, monitoring, decontamination, or a different machine. Confirm whether heat-protection, cooling, fire-resistant hoses, environmental kits, or site-specific modifications are available and approved. The risk assessment should also address power cables, hydraulic leaks, visibility, communications, debris, structural collapse, and emergency recovery.

Do not rely on a generic claim that a demolition robot works in harsh environments. The exact site classification and supplier documentation must control the decision. Buyers should document the intended workflow, confirm the exact configuration in writing, and compare the complete delivered and supported package rather than relying on a product name or headline price. Anton Robots can help organise those questions before a procurement decision is made for the Husqvarna DXR 300.

A Husqvarna DXR 300 requires trained operators and a task-specific demolition plan. The project should define machine access, floor capacity, structural sequence, attachment selection, power supply, ventilation, exclusion zones, dust and silica controls, noise, debris handling, communication, and emergency recovery. Operators need practical instruction in remote controls, stability, outriggers, working angles, hydraulic tools, daily checks, emergency stops, and safe shutdown. Maintenance personnel should understand hydraulic pressure, hoses, filters, lubrication, electrical systems, track condition, and attachment wear.

A competent person must assess the structure and prevent unplanned collapse. Remote operation reduces exposure but does not eliminate risk from flying fragments, overturning, falling material, electricity, fire, or loss of communication. For used machines, verify inspection records, remote condition, safety functions, service history, and conformity documents. Anton Robots can help ensure a quote includes training, commissioning, documentation, and service instead of only the robot and tool.

Buyers should document the intended workflow, confirm the exact configuration in writing, and compare the complete delivered and supported package rather than relying on a product name or headline price. Anton Robots can help organise those questions before a procurement decision is made for the Husqvarna DXR 300.

The Husqvarna DXR 300 can be transported internationally, but it is heavy industrial equipment rather than a parcel shipment. The buyer should confirm regional availability, dealer territory, export controls, electrical specification, conformity documents, freight method, lifting points, dimensions, attachment transport, insurance, customs duties, taxes, and local commissioning. A complete machine weighs around 1,960 kg before considering the selected tool and transport accessories, so loading, unloading, forklifts, cranes, trailers, and site access must be planned.

Hydraulic tools may ship separately and require secure restraint. Used equipment should be inspected before dispatch, with photos, operating tests, serial numbers, service records, and clear responsibility for damage in transit. Support is also regional: a machine that can physically be imported may still be a poor purchase if parts, trained technicians, approved attachments, or electrical compatibility are unavailable. Request an international delivered quote through Anton Robots so logistics and support are evaluated together.

Buyers should document the intended workflow, confirm the exact configuration in writing, and compare the complete delivered and supported package rather than relying on a product name or headline price. Anton Robots can help organise those questions before a procurement decision is made for the Husqvarna DXR 300.

A complete DXR 300 demolition deployment needs more than the tracked robot. The project may require a breaker, crusher, shear, bucket, dust-reduction kit, spare chisels or jaws, hydraulic consumables, power cables, transformer or site electrical equipment, lifting and transport gear, barriers, signage, ventilation, water suppression, debris handling, and structural engineering. Site planning should verify access width, turning space, slopes, floor loading, working reach, overhead hazards, and the ability to recover the machine if it stops inside a hazardous zone.

Daily maintenance space, washdown or decontamination procedures, spare hoses, filters, lubricants, and secure storage for the remote are also important. Contractors should model utilisation, attachment changes, transport time, operator training, service intervals, and consumable cost before buying. Ask for a complete bill of equipment and responsibilities. Anton Robots can help compare the DXR 300 with current demolition robots and request a deployed-system quote rather than an incomplete base-machine price.

Buyers should document the intended workflow, confirm the exact configuration in writing, and compare the complete delivered and supported package rather than relying on a product name or headline price. Anton Robots can help organise those questions before a procurement decision is made for the Husqvarna DXR 300.