FANUC LR Mate 200iD/7L

The FANUC LR Mate 200iD/7L price is available by quotation and changes with controller, protection variant, tooling, software and cell integration. The final system may include gripper, vision, force sensor, machine interface, fixture, safety, PLC, programming and acceptance. The robot arm is only one part of the investment. A usable industrial robot cell may also require the controller, FlexPendant or operator interface, pedestal, end effector, dress pack, vision, fixtures, safety equipment, PLC and fieldbus integration, guarding, programming, installation, training and production acceptance. Freight, taxes, customs, spare parts and local support can also change the delivered cost.

Before comparing offers, confirm the exact variant, controller generation, condition, included equipment, software licences and service responsibilities. The better buying question is: what is included, what performance is guaranteed, and who supports the complete cell?

You can request FANUC LR Mate 200iD/7L pricing or a complete automation quote through Anton Robots before committing.

You can buy or request the FANUC LR Mate 200iD/7L through Anton Robots. Anton Robots helps industrial buyers verify the genuine commercial route, compare new, used, refurbished or integrator-built packages and determine whether the FANUC LR Mate 200iD/7L matches the payload, reach and process. LR Mate 200iD/7L remains an active FANUC small-payload robot with an official product page and multiple variants.

Before buying, confirm the exact robot variant, serial number where applicable, controller, RobotWare version, mounting orientation, environmental protection, end effector, process equipment, safety architecture, shipping, warranty and commissioning. A bare manipulator listing is not the same as a production-ready cell. Professional buyers should compare the total installed system, production target and support route rather than only the lowest displayed robot price.

To start, request FANUC LR Mate 200iD/7L buying or sourcing guidance through Anton Robots.

You can find the FANUC LR Mate 200iD/7L for sale through FANUC, integrators, distributors and Anton Robots. Finding a FANUC LR Mate 200iD/7L for sale is only the first step. Buyers should verify whether the offer is a new supported robot, an integrator package, remaining stock, a used manipulator, a refurbished system or an incomplete arm without the correct controller and software. Confirm standard, cleanroom, washproof or other variant, controller, condition, tool, software, safety, warranty and integration.

A useful comparison should cover the exact payload and reach variant, controller generation, operating hours, maintenance, calibration, batteries, cables, tooling, safety hardware, delivery, commissioning and warranty. Avoid treating a marketplace listing as proof that ABB will support the exact serial number or configuration.

If you are evaluating a FANUC LR Mate 200iD/7L, contact Anton Robots. We can also compare it with other robotic arms for the same application.

Yes. You can request a FANUC LR Mate 200iD/7L quote through Anton Robots. A useful quote should identify the exact robot variant, controller, operator interface, RobotWare options, cabling, mounting, protection class, freight, warranty and available support. The proposal should define tool and part load, reach, cycle, process, machine, environment, mounting, safety, communications and acceptance.

The supplier also needs the part weight and dimensions, tool mass and centre of gravity, required reach, cycle time, accuracy, process equipment, floor layout, utilities, communications and safety constraints. This allows the proposal to be based on the real application rather than a generic arm price. Ask for a clear statement of integration scope, production acceptance test, exclusions, delivery milestones and responsibility after commissioning.

Anton Robots can help compare the FANUC LR Mate 200iD/7L against other industrial robot arms and prepare a package around the actual task.

A typical FANUC LR Mate 200iD/7L package normally includes the arm, R-30iB Plus controller, teach pendant, robot cables, software and standard protection. The exact contents vary by country, controller generation, integrator and application, so buyers should request a written bill of supply:

• FANUC LR Mate 200iD/7L robot
• R-30iB Plus Mate controller and pendant
• Robot and power cables
• Pedestal, wall or inverted mount
• Gripper, camera, dispenser or process tool
• iRVision or force-sensor package
• Fixtures, PLC, fieldbus and safety equipment
• Programming, installation, training and support

The tool, machine interface, fixtures and safety cell are application-specific and normally separate. End effectors and integration are especially important. The same robot can be configured for welding, machine tending, palletizing, handling, dispensing or assembly, but each task needs different tooling, fixtures, process equipment and safety validation. A low robot-only price may exclude most of what makes the system productive.

You can request an itemised FANUC LR Mate 200iD/7L package quote through Anton Robots before approving the cell.

The LR Mate 200iD/7L has a 7 kg payload and 911 mm reach. FANUC specifies six axes, ±0.01 mm repeatability, approximately 27 kg mechanical weight and 0.5 kW average power consumption. The practical result depends on the exact variant, controller, payload centre of gravity, tool, mounting position, process and cell design rather than the headline specification alone. The payload includes tool, cables and part, and angle mounting can impose additional operating-envelope conditions.

Before buying or integrating the robot, verify complete load, centre of gravity, reach, mounting, wrist moments, speed and cycle. A proper evaluation should use RobotStudio simulation, load diagrams, the real parts and tools, representative cycle testing and a documented safety assessment. Use the exact load diagram and mounting configuration.

You can request FANUC LR Mate 200iD/7L application advice through Anton Robots and compare the complete cell or a more suitable current ABB alternative.

The LR Mate 200iD/7L is a high-speed small industrial robot. Published joint speeds reach approximately 370, 310, 410, 550, 545 and 1,000 degrees per second across J1 to J6. The practical result depends on the exact variant, controller, payload centre of gravity, tool, mounting position, process and cell design rather than the headline specification alone. The robot will not reach every maximum joint speed simultaneously, and real cycle time includes gripper, machine and process waits.

Before buying or integrating the robot, verify complete path, payload, acceleration, singularities, tool timing, machine signal, safety and ROBOGUIDE cycle estimate. A proper evaluation should use RobotStudio simulation, load diagrams, the real parts and tools, representative cycle testing and a documented safety assessment.

Guarantee cycle time using a representative acceptance test. You can request FANUC LR Mate 200iD/7L application advice through Anton Robots and compare the complete cell or a more suitable current ABB alternative.

It is well suited to machine tending, picking, packaging, assembly, inspection, dispensing, labelling and light material removal. Its compact size and long reach allow it to work inside or around machines and dense automation equipment. The practical result depends on the exact variant, controller, payload centre of gravity, tool, mounting position, process and cell design rather than the headline specification alone. Deep access, process forces, heavy tools and long parts may exceed the 7 kg or 911 mm envelope.

Before buying or integrating the robot, verify task, load, reach, process, cycle, tool, machine opening, fixture, environment and safety. A proper evaluation should use RobotStudio simulation, load diagrams, the real parts and tools, representative cycle testing and a documented safety assessment. Use it when compact high-speed industrial automation matters.

You can request FANUC LR Mate 200iD/7L application advice through Anton Robots and compare the complete cell or a more suitable current ABB alternative.

FANUC offers IP67 standard protection plus IP69K, washproof and cleanroom LR Mate variants. Specific models such as 7WE, 7WP and 7LC address different cleaning and contamination requirements. The practical result depends on the exact variant, controller, payload centre of gravity, tool, mounting position, process and cell design rather than the headline specification alone. The standard 7L should not be assumed to meet every washdown, food or cleanroom standard.

Before buying or integrating the robot, verify exact suffix, IP rating, cleanroom class, food option, lubricants, connectors, cleaning method and certification. A proper evaluation should use RobotStudio simulation, load diagrams, the real parts and tools, representative cycle testing and a documented safety assessment. Buy the exact environmental variant required.

You can request FANUC LR Mate 200iD/7L application advice through Anton Robots and compare the complete cell or a more suitable current ABB alternative.

Yes, it supports floor, angle and inverted mounting. The light 27 kg arm can be integrated over machines, on side frames or in compact cells. The practical result depends on the exact variant, controller, payload centre of gravity, tool, mounting position, process and cell design rather than the headline specification alone. The structure, cables and reachable envelope must be checked for the exact orientation and payload.

Before buying or integrating the robot, verify mounting rules, frame, bolts, deflection, reach, cable routing, maintenance and safety clearance. A proper evaluation should use RobotStudio simulation, load diagrams, the real parts and tools, representative cycle testing and a documented safety assessment. Simulate the orientation in ROBOGUIDE.

You can request FANUC LR Mate 200iD/7L application advice through Anton Robots and compare the complete cell or a more suitable current ABB alternative.

Choose 7L for 7 kg payload and 911 mm reach; choose 4S for a smaller 4 kg, 550 mm compact cell. The 4S weighs about 20 kg and minimises interference, while the 7L covers deeper machines and wider fixtures. The practical result depends on the exact variant, controller, payload centre of gravity, tool, mounting position, process and cell design rather than the headline specification alone. A longer arm can increase footprint and collision risk when it is not required.

Before buying or integrating the robot, verify tool and part mass, all positions, machine depth, cell size, mounting, cycle and future products. A proper evaluation should use RobotStudio simulation, load diagrams, the real parts and tools, representative cycle testing and a documented safety assessment. Choose the shortest arm with sufficient payload and reach margin.

You can request FANUC LR Mate 200iD/7L application advice through Anton Robots and compare the complete cell or a more suitable current ABB alternative.

Both provide 7 kg payload, 911 mm reach and ±0.01 mm repeatability. LR Mate is a conventional high-speed safeguarded robot weighing about 27 kg, while CR-7iA/L is collaborative and weighs about 55 kg. The practical result depends on the exact variant, controller, payload centre of gravity, tool, mounting position, process and cell design rather than the headline specification alone. Collaborative operation can reduce speed, while a fenced LR Mate may need more cell safety hardware.

Before buying or integrating the robot, verify human interaction, speed, cycle, floor space, guarding, tool hazard, mounting, support and total cell cost. A proper evaluation should use RobotStudio simulation, load diagrams, the real parts and tools, representative cycle testing and a documented safety assessment. Use LR Mate for throughput and CR-7iA/L for genuine shared work.

You can request FANUC LR Mate 200iD/7L application advice through Anton Robots and compare the complete cell or a more suitable current ABB alternative.

The FANUC LR Mate 200iD/7L can be supplied internationally through FANUC and authorised partners. Industrial robot delivery depends on the destination country, robot condition, controller, freight method, export rules, customs and local service coverage. Confirm exact protection variant, controller, electrical standard, freight, certification, local service and commissioning.

Before ordering, confirm who disconnects, preserves, packs, lifts, insures, imports, installs, anchors, reconnects, calibrates and recommissions the system. Used robots should be shipped with transport restraints, controller cabinets, FlexPendant, cables, backups and maintenance records. A robot that can physically be transported is not necessarily supported or ready for production in another country.

You can request international availability for the FANUC LR Mate 200iD/7L through Anton Robots so the complete delivery and commissioning route can be checked. Buyers should obtain written confirmation of these points before approving a budget, purchase order, integration project, or production deployment.

FANUC LR Mate 200iD/7L availability and lead time can change according to model status, variant, controller, options, integrator capacity and destination. The model is current, while variant, controller, tooling and integrator capacity determine lead time.

Before committing to a production date, ask whether the robot is factory ordered, remaining stock, used, refurbished or already allocated, and whether the controller, tooling, safety system and integration resources share the same schedule. Cell design, RobotStudio simulation, manufacturing of fixtures, software, factory acceptance testing, freight, installation and site acceptance often take longer than obtaining the arm itself.

You can request current FANUC LR Mate 200iD/7L availability and project lead time through Anton Robots. Buyers should obtain written confirmation of these points before approving a budget, purchase order, integration project, or production deployment.

Before buying the FANUC LR Mate 200iD/7L, check the warranty or refurbishment guarantee, covered components, service territory, repair process, software entitlement, spare-parts availability and who supports the integrated cell. Confirm FANUC coverage for robot and controller and integrator coverage for tools, fixtures, vision, PLC and safety. Ask:

• Is the manipulator, controller, FlexPendant and process equipment covered?
• Who handles diagnostics, calibration, repairs and replacement parts?
• Are RobotWare licences, backups and RobotStudio files transferred?
• Are preventive maintenance, grease, batteries and dress packs included?
• Who supports the gripper, welder, vision, PLC and safety system?
• What response time and production-recovery commitment is provided?

For a legacy robot, serial-number support and spare-parts horizon are primary buying criteria. Contact Anton Robots to review the complete package. Buyers should obtain written confirmation of these points before approving a budget, purchase order, integration project, or production deployment.

The FANUC LR Mate 200iD/7L is worth considering if you need a proven high-speed compact robot with 7 kg payload, long LR Mate reach and broad industrial options. Its strongest value comes from its 911 mm reach, ±0.01 mm repeatability, low 27 kg mass, high speed and mature FANUC ecosystem.

However, a robot arm only creates value when the task, tool, fixture, controller, safety design, cycle time and support are correctly engineered. It requires a safeguarded cell and may be more robot than needed for very short-reach tasks or too small for heavier tooling.

Buyers should compare total installed cost, expected throughput, quality, uptime, maintenance, energy, changeover and remaining product life rather than only payload and purchase price. For a legacy unit, a low acquisition cost can be outweighed by integration, batteries, calibration, parts and downtime risk. Compare other robotic arms and request application advice through Anton Robots.