Find, compare and buy robots from top manufacturers
The AotingBots SW80 A is a large waterless autonomous commercial cleaning robot for malls, factories and other open indoor spaces, combining sweeping, vacuuming and mopping with up to 17 kPa suction and an 850 mm cleaning path.
Get quotes in 24–48 hours
Verified suppliers & secure process
Transparent pricing & guidance
The AotingBots SW80 A is a large autonomous commercial cleaning robot designed for open indoor environments such as shopping malls, factories, conference centres and exhibition halls.
Unlike a conventional wet scrubber, the SW80 A is positioned as a waterless cleaning platform combining mopping, sweeping and vacuuming, with up to 17 kPa maximum vacuum power and an 850 mm cleaning path.
AotingBots publishes up to 8 hours of hard-floor runtime and up to 12 hours in silent mode, with a 100 Ah battery and approximately four hours of charging.
Its 360-degree laser and multi-sensor fusion support dynamic mapping and centimetre-level positioning, while the standard charging dock and remote task management are intended to reduce routine operator intervention.
Sweeping, vacuuming and mopping avoid the water servicing required by conventional scrubbers.
High published suction supports debris pickup across suitable commercial floors.
Wide working path targets productive coverage across large open indoor areas.
AotingBots publishes up to 8 hours on hard floors and up to 12 hours in silent mode.
Large published map capacity supports complex commercial and industrial facilities.
Laser plus multi-sensor fusion supports dynamic mapping and centimetre-level localization.
Autonomous commercial cleaning robot
Autonomous waterless mopping, sweeping and vacuuming for large commercial and industrial floors
Indoor commercial and industrial spaces including malls, factories, conference centres and exhibition halls
Current commercial SW80 A platform; waterless cleaning, zero-edge cleaning, 40,000 m² mapping, remote task management and standard charging dock
No transport payload; 3.5 L trash bin and 5 L dust bag per current product parameter table
850 mm cleaning path
Autonomous wheeled mobility; 0.3 / 0.45 / 0.6 m/s cleaning speeds; up to 12% / 7° gradeability
Waterless mopping, sweeping and vacuuming with 17 kPa maximum vacuum power
0.6 m/s
8 h on hard floors; up to 12 h silent mode
100 Ah rechargeable battery; approx. 4 h charging; charger standard
360° laser plus multi-sensor fusion positioning, dynamic mapping and centimeter-level localization
360° laser and multi-sensor fusion; exact complete sensor bill not separately published
1,025 × 850 × 975 mm
190 kg
Dusty Robotics FieldPrinter 2
AotingBots does not publish one universal commercial price for the SW80 A. Pricing depends on country, quantity, charging setup, software, deployment, warranty and support.
You can request an AotingBots SW80 A quote through Anton Robots.
You can request the AotingBots SW80 A through Anton Robots or directly through AotingBots and its regional commercial channels.
Confirm charger, software access, commissioning, warranty, filters, brushes and local service before purchase.
No. AotingBots positions the SW80 A as a waterless commercial cleaning robot.
It combines mopping, sweeping and vacuuming rather than using conventional clean-water and wastewater tanks.
The current product information lists mopping, sweeping and vacuuming.
The robot is intended for routine dry or waterless floor care rather than heavy wet scrubbing.
AotingBots publishes up to 17 kPa maximum vacuum power.
Actual pickup performance depends on debris type, floor texture, filter condition and operating speed.
The published cleaning path is approximately 850 mm.
That makes the SW80 A more suitable for broad open areas than tight office corridors.
AotingBots publishes up to approximately 8 hours on hard floors and up to 12 hours in silent mode.
Actual runtime depends on suction load, floor resistance, route complexity and battery condition.
The current product parameter table lists approximately 4 hours of charging with a 100 Ah rechargeable battery.
A standard charging dock is included in the current product positioning.
AotingBots publishes cleaning speeds of approximately 0.3, 0.45 and 0.6 m/s.
The selected speed should reflect floor condition, traffic and obstacle density.
The SW80 A uses 360-degree laser sensing plus multi-sensor fusion for positioning and dynamic mapping.
AotingBots also describes centimetre-level localization and remote task management.
AotingBots publishes a maximum mapping area of approximately 40,000 m².
Large map capacity is useful for malls, factories and exhibition-scale spaces.
AotingBots publishes gradeability up to approximately 12% / 7°.
Actual traction depends on floor finish and the geometry of the slope or transition.
The current product table lists a 3.5 L trash bin and a 5 L dust bag.
Emptying frequency depends on debris volume and cleaning mode.
It is best suited to large indoor commercial or industrial environments such as malls, factories, conference centres and exhibition halls.
It is less suitable for narrow, highly segmented layouts.
Check battery warranty, filters, brushes, dust bags, software access, remote support, spare parts and technician coverage.
Also confirm who manages mapping changes when layouts change.
The SW80 A is worth considering when a site wants long-runtime waterless autonomous cleaning across large open areas and does not need conventional wet scrubbing.
Compare it with other commercial cleaning robots based on the actual floor-care requirement.
Tell us what you need. Our experts will help you find the right robot for your business.
Browse Robots
Humanoid Robots
Robot Dogs
Robotic Arms
Cobots
AMR Robots
AGV Robots
Service Robots
Companion Robots
